Not rated yet
FR832 Brackets for Interlocking Tile
Mullane FR832 Fitrite 3-Pipe Snow Rail Brackets for Ludowici Interlocking Roof Tile
Options:
FR832 Bronze
FR832S Short Bronze
FR831 Aluminum
3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings. Aluminum brackets require galvanized pipes. Bronze brackets use brass pipes.
This is a special order item that may require a 6-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on the roof slope and snow load.
ADDITIONAL ITEMS:
GLP1050-10: 10' sections of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets
GPCON1050: 3/4" I.D. Galvanized Pipe Couplings
GPEC1050: 3/4" I.D. Galvanized Pipe End Caps
RBP1050-12: 12' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets
RBP1050-6: 6' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets
RBPCON1050: 3/4" I.D. Brass Pipe Couplings
RBTEC1050: 3/4" I.D. Brass Pipe End Caps
NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. We provide free shipping on snow guard orders over $1,000.00. For more information, call us at 814-786-9085 or send us an email.
Mullane FR832 Fitrite 3-Pipe Roof Snow Rail Brackets for Ludowici Interlocking Roof Tile. 3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings. Aluminum brackets require galvanized pipes. Bronze brackets use brass pipes.
Snow rails are used along the perimeter of slate roofs for the prevention of sudden and unexpected ice and snow avalanches, which can damage people, cars, shrubbery, lower roofs, and other property underneath. The rail system can also include stainless steel expanded metal to prevent slates and other debris from sliding under the rails and creating a hazard. Also, a standard field array of snow guards can be included on the field of the roof above the snow rail for maximum protection.
Snow rail fence brackets are installed parallel to and approximately 24-36 inches above the eaves. The brackets should be spaced from 18-24 inches to no more than 42-48 inches apart horizontally, depending on the pitch of the roof and the expected snow load. It is recommended to use through bolts with a backer plate on the underside of the roof deck. Bronze, brass, or stainless steel pipe is recommended. Copper water pipes should not be used with Mullane snow rails, although they are used with Sieger snow rail brackets, both for slate roofs and for standing seam roofs.
Snow rail fence brackets are installed parallel to and approximately 24-36 inches above the eaves. The brackets should be spaced from 18-24 inches to no more than 42-48 inches apart horizontally, depending on the pitch of the roof and the expected snow load. It is recommended to use through bolts with a backer plate on the underside of the roof deck. Bronze, brass, or stainless steel pipe is recommended. Copper water pipes should not be used with Mullane snow rails, although they are used with Sieger snow rail brackets, both for slate roofs and for standing seam roofs.
High snow load areas should use a three-pipe system such as the Mullane 500, the Mullane Fitrite 131 ML, or the Mullane Fitrite 132 BR, If a smaller system is used, then it should be supplemented with an additional snow guard array in the field of the roof above the snow rail.
