Fitrite 122BR 2-Pipe Snow Rail Brackets

Mullane Fitrite #122BR 2-Pipe Bronze/Brass Snow Rail Bracket for slate roofs. 

The Model #122 Snow Fence Bracket is cast in bronze for durability. The brackets accommodate two 1/2" I.D. brass pipes. The FR121BR is typically installed on slate roofs with rafters not over 18 ft. in areas with moderate snow falls.

1/2" red brass pipe, couplings and end caps are sold separately, or buy them at your local pipe supplier.

11 plate sizes available (plate size matches slate size): select size in drop-down list below for pricing. Don't see your size? We may still have it available but not listed (see image of available plate sizes). Call us at 814-786-9085 or send us an email (mail@josephjenkins.com).

This special order item requires a 2-3 week lead time. It is non-returnable and non-refundable. 

Additional Items for Bronze Brackets:

RBP800-12: Berger 1/2" I.D. Brass Pipe 12' Lengths are $270.00 each

RBPCON800: 
Berger 1/2" Brass Pipe Coupling are $6.50 each

RBTEC800: 
Berger 1/2" Brass Pipe End Caps are $6.50 each
 

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on snow guard orders over $1,000.00.
  • $166.00
Qty:  
OR
Not rated yet


Snow rails are used along the perimeter of slate roofs for the prevention of sudden and unexpected ice and snow avalanches, which can damage people, cars, shrubbery, lower roofs, and other property underneath. The rail system can also include stainless steel expanded metal to prevent slates and other debris from sliding under the rails and creating a hazard. Also, a standard field array of snow guards can be included on the field of the roof above the snow rail for maximum protection.

Snow rail fence brackets are installed parallel to, and approximately 24-36 inches above the eaves. The brackets should be spaced from 18-24 inches to no more than 42-48 inches apart horizontally, depending on the pitch of the roof and the expected snow load. It is recommended to use through bolts with a backer plate on the underside of the roof deck. Bronze, brass or stainless-steel pipe is recommended. Copper water pipe should not be used with Mullane snow rails, although they are used with Sieger snow rail brackets, both for 
slate roofs, and for standing seam roofs

High snow load areas should use a three pipe system such as the Mullane 500, the Mullane Fitrite 131 ML, or the Mullane Fitrite 132 BR,  If a smaller system is used, then it should be supplemented with an additional snow guard array in the field of the roof above the snow rail.


 
 
    • Weight
      19 lbs
    • SKU
      SGFR122BR6X12
  • Manufacturer
    Mullane
  • Plate Size
    FR122BR6X12 (6"X12"), FR122BR8X16 (8"X16"), FR122BR9X16 (9"X16"), FR122BR10X16 (10"X16"), FR122BR12X16 (12"X16"), FR122BR8X18 (8"X18"), FR122BR10X18 (10"X18"), FR122BR12X18 (12"X18"), FR122BR10X20 (10"X20"), FR122BR12X20 (12"X20"), FR122BR12X22 (12"X22"), FR122BR14X22 (14"X22")
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Related products