Green Mountain C1 Retrofit Copper Snow Guards
Green Mountain C1 Retrofit Copper Snow Guards for existing roofs. Can also be used on new random-width roofs where a uniform spacing is required (hook the snow guards over the top of the shingles).
Fits slate 16" - 20" in length.
Pad area is 2 3/8"L x 2 3/8"W (at widest point) x 1 7/16"H.
Standard strap length is 13 5/8".
Standard hook height is 1 1/4".
This snow guard has a 12.25 inch "reach." When you slide it underneath your slate, it can only go 12 1/4." The head of the slate you're hooking over needs to be in that range.
Easily installs by pushing up underneath the slates using a "slate ripper " or similar tool. Just slide under the overlying course and pull down to engage the tab. No need for nail hangers.
Allows snow and ice to drop off in small amounts or melt completely on the roof. Protects against ice and snow damage at the lower roof level, gutters, valleys, crickets, roof protrusions, plumbing vents, and at ground level cars, people, landscaping, pets, walkways, ground mounted mechanical units.
NOTE: Returned Green Mountain snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project.