Berger Pro 100 Retrofit Snow Guards
Berger Pro 100 Retrofit Snow Guard.
This is one of the best deals on heavy-duty snow guards! 17 1/2" overall length, 4" wide face, 12.5" reach (see image), 8.3 oz. each.
The heavy-duty Pro 100 snow guard is compatible with corrugated, flat, slate, TruSlate, and asphalt shingled roofs. This snow guard provides fast installation and is ideal for existing applications with slate roofs.
The superior design of the Pro 100 includes a 1" gusset that reinforces the shoe, which makes this snow guard 5X stronger than traditional residential snow guards. The Pro 100 has been tested to withstand a 300 lb. point load at any location when applied to the gusset side of the shoe. Simply insert the slotted bar under the slate or shingle, engage a nail with one of the conveniently placed slots and pull to fully secure the bar (12 1/2" maximum reach to nail).
SGGP100: Galvanized Steel - $6.25
SGSP100: Stainless Steel - $9.25
SGCP100: Copper - $14.25
NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
The following recommendation is for a typical application: slate size 12 inches x 18 inches, with a 7 1/2 inch exposure, and a roof pitch of 12/12 (45 degrees) and can be adjusted for differing conditions such as high snow loads, or drifting conditions. For this example, the rafter length is 18 feet.
Guards shall be installed in horizontal rows parallel to the eave. The first row shall be installed on the third course of slate, and spaced no more than 24 inches apart in the rows. Subsequent rows shall be spaced 30 inches vertically (4th slate course) and the guards offset 12 inches from the course below. Install 6 horizontal rows. The preceding technical information is for informational purposes only and is not intended to replace the manufacturer's recommendations for a particular project. We will provide layouts upon receipt of roof plan with elevations. Manufacturer is not responsible for improper installation, or installation in insufficient quantities.
Metal TypeSGGP100 Galvanized, SGSP100 Stainless, SGCP100 Copper