Standing Seams

We sell snow guards for standing seam roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet! 

Items: 114 of 14
  • ASG33G Snow Guards

    Not rated yet

    Alpine ASG33G Standing Seam Snow Guards in Brass or Aluminum.

    6 1/8" wide overall 

    3 9/32" high (due to angle, sits up from roof 2.5")

    1/8" thick (mounting base is 5/16" thick).
       
    Slot is 1.75" long, 3/8" wide, and 5/8" deep.

    Brass: 1.1 lbs.

    Utilizes stainless steel oval point set screws, providing a secure attachment without penetrating or damaging the roofing material. The stainless set screws are compatible with all metals and can be mounted on any type metal roofing. Clamping to the seam will not void the panel manufacturers warranty.

    • $14.00
  • Vermont Standing Seam Snow Guards

    Not rated yet

    Vermont Standing Seam snow guards are available in cast aluminum or bronze. They have a 1/4" wide slot; 1/2" slot depth. They are suitable for seams 1.5" or less high.

    They can be used on double-locked seams or seams that have been crimped over at installation point by a professional installer/roofer.

    Options:

    SS1A - Aluminum Mill-Finish: $12.99
    SS1A - Aluminum Hunter Green: $15.99
    SS1SC - Aluminum Bronze: $15.99
    SS1SC - Aluminum Charcoal Gray: $15.99
    SS1C - Alum. Custom Paint (min. 300 pieces required): $16.99
    SS1B - Bronze: $21.50 

    • $12.99
  • Sieger 2-Pipe Standing Seam Brackets

    Not rated yet

    Sieger 2-Pipe Standing Seam Snow Rail Brackets are 5 3/8" wide overall and stand 3 1/4" high off the roof. These brackets are part of an affordable lifetime snow rail system. Six stainless steel set screws are included with every bracket and are compatible with any standing seam metal roofing type. Requires an 1/8" Allen wrench for installation.        

    Brackets only: rail must be bought separately. For bronze brackets, ask for 1/2" "Type K" copper pipe at your local plumbing supply store, or use solid 1/2" copper or brass rods. Copper pipes can be soldered together with couplings. For aluminum brackets, use stainless steel pipe.  

    For Snap Lock standing seam metal roofing, look for the "SL" in the product code. These slots are tapered to accommodate Snap Lock standing seams.

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).


    Options:

    SS2ACR Aluminum: 1/4" or 3/8" slot; 7/8" deep groove - $14.25.

    SS2BCR Bronze: 1/4" slot; 7/8" deep groove; 25.2 oz. - $29.00.

    SS2ASLCR Aluminum Tapered Slot: 1 3/8" deep groove, tapered 5/16" to 7/16" wide - $15.75.

    SS2BSLCR Bronze Tapered Slot: 1 3/8" deep groove, tapered 5/16" to 7/16" wide - $32.50.
      

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted. There is an upcharge of $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), Sieger will hold your order until they have another paint job of the same color, then paint them at that time. It may be a few weeks wait. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
    • $14.25
  • Sieger Eagle Standing Seam Snow Guards

    Not rated yet

    Classic Standing Seam Eagle heavy duty snow guard is available in cast aluminum, or cast bronze. 4 1/2" wide; stands 4 1/8" high. Has a 1/4" wide groove, approximately 7/8" deep, and fits a 1" high seam, with six stainless steel set screws.

    These snow guards can be used on any type of standing seam metal roof because the set screws are stainless steel and are therefore compatible with any type of metal.

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).


    Options:

    SSEAGEagle Aluminum - $12.35.

    SSEAGEagle Bronze - $25.90.

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $12.35
  • Sieger Crimp On Snow Guards

    Not rated yet

    Heavy duty Sieger bronze crimp on snow guard for standing seam metal roofs. 7/8" deep groove, 1/4" wide. 10.3 oz. each. 5 1/2" wide overall. Stands 4" high off roof.

    Minimum of 10 pieces per order. Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).

    Use the Double Welt Iron or a sledge hammer head to hold the seam in place as you crimp the snow guard together. Made of solid bronze.

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
    • $15.75
  • Sieger SS2 Standing Seam Snow Guards

    Not rated yet

    Cast aluminum or cast bronze, heavy duty snow guard for standing seam roofs. SS2A and SS2B grooves are approximately 7/8" deep, and the snow guard sits 3 1/4" high off the roof

    Tapered slots accommodate Snap Lock standing seam metal roofing: look for the "SL" in the product code. Tapered slot snow guard grooves are 1 5/8" deep and the snow guard sits 3 3/4" high off the roof.

    The aluminum snow guards are silver/gray, not in any way bronze colored as the image may suggest. They are the color of mill finish aluminum. Six stainless steel set screws included (grade 18-8 stainless) for 1/8" Allen wrench.

    The bronze are made of solid bronze (#836 stock - 85% copper, 5% tin, 5% zinc, and 5% lead).
     

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).


    Options:

    SS2A Aluminum 1/4" Slot - $11.50.

    SS2A 
    Aluminum 3/8" Slot - $11.50.

    SS2B Bronze 1/4" - $25.60.

    SS2ASL Aluminum Tapered Slot - $12.95.

    SS2BSL Bronze Tapered Slot - $32.55.

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $11.50
  • Berger #1 Snow Guards

    Not rated yet

    Berger #1 Heavy Duty Snow Guards for Standing Seam Roofs are available in bronze or galvanized iron.    

    The roofer's choice since 1883 for use on standing seam metal roofs! It weighs 5 1/2 oz., stands 2 3/4" high off of the roof, and is 5" wide. Pinch to clamp over the seam to create a rigid, permanent job. You may need the Double Welt Iron to hold the seam in place as you crimp the snow guard together (a sledge hammer head can work too). The gap that fits over the seam is 1/4" wide. If your seam is thicker than 1/4", this snow guard probably is not the best choice. For a thicker seam, try the Berger AP Aluminum Snow Guards

    Options:

    SGML1 Galvanized Iron - $14.50
    SGBR1 Bronze - $21.70

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    • $14.50
  • Berger AP400/516 Snow Guards

    Not rated yet

    Berger AP400 and AP516 snow guards are non-penetrating mill finish aluminum devices which have been engineered specifically for use with more popular structural and non-structural pre-formed and architectural metal roof systems. They're secured without glues or sealants, utilizing custom milled stainless steel set screws to clamp them in place. They're produced in cast aluminum and are available in two different seam widths and heights, and can be custom painted (see below).

    AP400: Seams up to 3/8" thick & 1 1/2" high.

    AP516: Seams up to 1/2" thick & 1 1/2" high.

    These snow guards do not restrict thermal movement. The deep throats permit them to be secured directly without damaging caps or compressing internal gasketing or sealant pockets. The 6" wide, deep blade design makes it particularly effective in retaining snow with the higher seams and wider panel widths common in pre-formed architectural roofing.

    Options:

    AP400M/AP516M: Mill Finished Cast Aluminum. "Mill finish" is the natural appearance of the aluminum as it comes from the  rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing - $22.00.

    AP400E/AP516E: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase - $24.00.

    AP400C/AP516C: Painted in your choice of 9 custom colors; Matte Black, Colonial Red, Dark Bronze, Forest Green, Hartford Green, Medium Bronze, Mansard Brown, Charcoal Gray, Slate Gray (see color chart below.) Paint requires a 3 week lead time. Please provide the color choice, name of the roofing manufacturer and the color of the panel in the customer notes when placing your order (No cancellations or returns) - $29.00.

    We have some AP400 and AP516 Mansard Brown and Colonial Red overstock items that may be available discounted. Call Joe at 814-786-9085 if you're interested.

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    • $22.00
  • Berger RT200/300 Snow Guards

    Not rated yet

    Berger RT200 and RT300 snow guards are non-penetrating devices which are secured to the standing seams of metal roofs utilizing stainless steel set screws to clamp them in place. They require no glues or sealants and will not restrict thermal movement or contribute to unsightly oil-canning. These  are particularly suited for double-lock and mechanically seamed metal roofing. Being traditional in design, they are ideal for restoration and  preservation work.

    RT200: For seams up to 3/16" wide (0.188") and no higher than 1". Suited for use with light gauge sheet metal such as 40 lb. terne, 26-gauge galvanized and 16 oz. copper.

    RT300: For seams up to 9/32" wide (0.297") and no higher than 1". Suited for heavier gauge metals such as 20 oz. copper, 24-gauge prefinished metal, and products of similar thickness.

    Options:

    RT200M - Mill Finished Cast Aluminum: natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing - $13.75.

    RT200E - Medium Gloss Black E-Coat Epoxy Primer: requires a final color coat after purchase - $14.75.

    RT200C - Painted in a custom color (no cancellations or returns). Please provide the color choice, name of the manufacturer and the color of the panel in the customer notes when placing order - $19.95.

    RT300M - Mill Finished Cast Aluminum: natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing - $13.75.

    RT300E - Medium Gloss Black E-Coat Epoxy Primer: requires a final color coat after purchase - $14.75.

    RT300C - Painted in a custom color (no cancellations or returns). Please provide the color choice, name of the manufacturer and the color of the panel in the customer notes when placing order - $19.95.

    RT200B - Cast Bronze - $18.25.

    RT300B - Cast Bronze - $18.25.

    Custom Color Choices: Matte Black, Colonial Red, Dark Bronze, Forrest Green, Hartford Green, Medium Bronze, Mansard Brown, Charcoal Gray, Slate Gray (See color chart below.) We have some overstock items that may be available discounted: RT300 Hartford Green, RT200 Mansard Brown and RT200 Slate Gray. Call Joe at 814-786-9085 to check price and availability.

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    • $13.75
  • Berger SG1 Snow Guards

    Not rated yet

    Berger Snow Meister SG1 Cast Aluminum Snow Guards for Standing Seam Roofs are available in Mill Finish, with an Epoxy Primer, or in polished bronze. 

    The SG-1 Snow Meister Snow Guards are used for a traditional double lock standing seam roof that is 1.0" deep x .250" wide.  These guards fit both 1" and 1-1/2" high seams.

    The symmetrical design rotates 180 degrees to match seam lock orientation. The set screws are stainless steel so these snow guards can be used with any type of metal roof.

    Options:

    SG1MF: Mill Finished Aluminum - natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing - $15.50.

    SG1EBK: 
    Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase - $16.95.

    SG1PBZ: 
    Polished Bronze - non-stock, special order (no cancellations or returns). Requires extended lead time - $25.50.

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $15.50
  • Berger SL1 Snow Guards

    Not rated yet

    Berger SL1 Snow Meister Cast Aluminum Snow Guard for Standing Seam Roofs are available in Mill Finish or with an Epoxy Primer. 

    Snow Meister SL-1 Snow Guard is designed to accommodate 1” Snap Lock Panels and a Single Lock Seams 1.0" deep x .64" wide.  Symmetrical design rotates 180 degrees to match seam lock orientation. These guards can also be used on standing seams up to 1.75" tall. 

    Options: 

    SL1MF: Mill Finished Aluminum - natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing - $15.90.

    SL1EBK: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase - $17.90.

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    • $15.90
  • E-Rail 2-Rail Standing Seam Brackets

    Not rated yet

    Berger E-Rail aluminum snow rail bracket for standing seam roofs is available in mill finish or with a black Epoxy Primer. This is a 1 or 2-rail moderate snow load system that is strong and light offering between the seams protection on metal roofs. It helps to control the possibility of dangerous ice slides, requiring no penetration of the roof. This system is easy to install. It has a receptor slot for a custom ornamental attachment.

    The Berger E-Casting is a device designed to be used with tubing to create a Rail System for the prevention of damage caused by the sliding of snow and ice on standing seam metal roofs. The E-Casting is designed to accommodate a seam of up to ½” (0.516”) thick and up to two inches (2") high. The tubing for the E-Rail is available in Stainless Steel, TBSS20 (1”x 1” x 20’) and Painted Steel, TBCR24P (1”x 1” x 24’).

    Stainless steel set screws included (keeps the rail from sliding sideways): rail sold separately.    

    Options:

    ECSTSF: Mill Finished Cast Aluminum - natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing (fits 1 or 2 rails) - $30.00.

    ECSTSFE: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase (fits 1 or 2 rails) - $35.00.

    TBSS20Tubing is available in 16-gauge stainless steel, 20 ft. long by 1" square, sold in full lengths only, currently at $149.00 each. Tube end caps are available in black plastic at $0.25 each. We also have stainless steel self tapping screws #8 X 1/2", sold by the bag (25 count). The screws are inserted into the bar adjacent to the bracket to keep the bar from sliding sideways.The screws prevent the rails from sliding sideways. Our manufacturer charges a flat fee of $350.00 for shipping east of the Mississippi. Call for pricing.

    See also Berger F-Rail Aluminum Snow Rail

    See also Berger S-Rail Aluminum Snow Rail 

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $30.00
  • S-Rail 1-Rail Standing Seam Brackets

    Not rated yet

    Berger S-Rail aluminum snow rail BRACKET ONLY, for standing seam roofs are available in Mill Finish or with a black Epoxy Primer. This is a 1-rail, low-profile, snow retention system for standard snow loads. It functions below the standing seams on metal roofs, helping to control the possibility of dangerous ice slides. It requires no penetration of the roof and is easy to install. This is an economical snow rail that's easy to retrofit to existing roofs.

    The Berger S-Casting is a device designed to be used with tubing to create a Rail System for the prevention of damage caused by the sliding of snow and ice on standing seam metal roofs.  The S-Casting is designed to accommodate a seam of up to ½” (0.516”) thick and up to two inches (2") high. The tubing for the S-Rail is available in Stainless Steel, TBSS20 (1”x 1” x 20’) and Painted Steel, TBCR24P (1”x 1” x 24’).

    Stainless steel set screws included; rail sold separately.     

    Options:

    SCSTSF: Mill Finished Cast Aluminum - natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing - $22.50.

    SCSTSFE: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase - $29.00.

    TBSS20: Tubing is available in 16-gauge stainless steel, 20 ft. long by 1" square, sold in full lengths only, currently at $149.00 each. Tube end caps are available in black plastic at $0.25 each. We also have the stainless steel self tapping screws #8 X 1/2", sold by the bag (25 count). The screws are inserted into the bar adjacent to the bracket to keep the bar from sliding sideways. Our manufacturer charges a flat fee of $350.00 for shipping east of the Mississippi. Call for pricing.

    See also Berger E-Rail and Berger F-Rail

    NOTE: Returned Berger snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $22.50
  • F-Rail 3-Rail Standing Seam Brackets

    Not rated yet

    Berger F-Rail aluminum snow rail brackets for standing seam roofs are available in mill finish or with a black epoxy primer. This snow retention system uses 2 or 3 rails for heavier snow loads. It functions below and above the standing seams, requiring no roof penetration, and is easy to install. 

    The Berger F-Casting is a device designed to be used with tubing to create a Rail System for the prevention of damage caused by the sliding of snow and ice on standing seam metal roofs.  The F-Casting is designed to accommodate a seam of up to ½” (0.516”) thick and up to two inches (2") high. The tubing for the F-Rail is available in Stainless Steel, TBSS20 (1”x 1” x 20’) and Painted Steel, TBCR24P (1”x 1” x 24’).

    Stainless steel set screws included: rail sold separately. 

    Designed to fit a seam of up to 0.516" thick and at least 1.5" high.

    Options: 

    FCSTSF: Mill Finished Cast Aluminum - natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing - $38.00.

    FCSTFP: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase - $39.95.

    TBSS20 Tubing is available in 16-gauge stainless steel, 20 ft. long by 1" square, sold in full lengths only, currently at $149.00 each. Tube endcaps are available in black plastic at $0.25 each. We also have the stainless steel self-tapping screws #8 X 1/2", sold by the bag (25 count). The screws are inserted into the bar adjacent to the bracket to keep the bar from sliding sideways. Our manufacturer charges $350.00 or more for shipping east of the Mississippi. Call for pricing.

     

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.
    • $38.00