Fitrite 832 Brackets for Designer Tile
Mullane Fitrite 3-Pipe Brackets for Designer Tile
#832 Bronze $735.00
#832S Short Bronze $482.00
#831 Aluminum $395.00
3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings. Aluminum brackets require galvanized pipes. Bronze brackets use brass pipes.
This is a special order item that may require a 6-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on the roof slope and snow load.
GLP1050-10: 10' sections of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets are $72.00.
GPCON1050: 3/4" I.D. Galvanized Pipe Couplings are $6.00 each.
GPEC1050: 3/4" I.D. Galvanized Pipe End Caps are $6.00 each.
RBP1050-12: 12' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $330.00.
RBP1050-6: 6' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $166.00 .
RBPCON1050: 3/4" I.D. Brass Pipe Couplings are $9.00 each.
RBTEC1050: 3/4" I.D. Brass Pipe End Caps are $9.00 each.
Snow rail fence brackets are installed parallel to and approximately 24-36 inches above the eaves. The brackets should be spaced from 18-24 inches to no more than 42-48 inches apart horizontally, depending on the pitch of the roof and the expected snow load. It is recommended to use through bolts with a backer plate on the underside of the roof deck. Bronze, brass, or stainless steel pipe is recommended. Copper water pipes should not be used with Mullane snow rails, although they are used with Sieger snow rail brackets, both for slate roofs and for standing seam roofs.
- Weight10 lbs
- Metal TypeBronze #FR832, Aluminum #FR831, Bronze Short #FR832S