Tile Roofs
We sell snow guards for tile roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet!
Alpine PD10 Copper Snow Guards
Pad area: 2 3/8" L x 2 3/8" W (at widest point) x 1 7/16" H; Strap length: 15 5/8"
Our riveted "fish head" design means optimum strength with no risk of unfolding. Thin, yet durable strap minimizes disruption of slate/shingle pattern while allowing secure mechanical attachment to the structural deck. Allows snow and ice to drop off in small amounts or melt completely. Protects against snow damage at the lower roof level (gutters, valleys, crickets, roof protrusions, plumbing vents, etc...) and at ground level (cars, people, landscaping, pets, walkways, ground mounted mechanical units).
Applicable roof types: New Slate, New Synthetic Shingles, New Composition Shingle, New Cedar Shake, New Flat Tile, New Spanish Tile, Existing Spanish Tile.$11.00 each.
We have to collect sales tax in the state of Vermont. Our website does not automatically collect taxes in that state. Please contact us directly to place your order; otherwise, we will call you to collect sales tax after the order is placed online.
Green Mt. C2 Copper Snow Guards
Green Mountain C2 Copper Snow Guards
Nail application solid copper snow guard.
Pad area: 2 3/8" L x 2 3/8" W (at widest point) x 1 7/16" H; Strap length: 15 5/8"
Applicable roof types: New Slate, New Synthetic Shingles, New Composition Shingle, New Cedar Shake, New Flat Tile, New Spanish Tile, Existing Spanish Tile.$10.00 each.
Also available as a retrofit snow guard (Green Mountain C1).
Sorry, we only have 1835 of that item availableMullane 200CPT Retrofit Snow Guards
The Mullane 200 CPT retrofit snow guard for tile roofs is designed to be installed on existing tile roofs with tiles up to 5/8" (0.625) thick with headlaps up to 3.5 inches. The shoe is cast bronze and the strap is 24-ounce cold-rolled copper.Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.
All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. The castings are produced locally by old-world craftsmen using state of the art equipment to assure that each casting is of consistent quality. The final assembly is done by hand, using only solid copper rivets, so that each finished product is of uniform quality.$24.50
NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders over $1,000.00.Gough Interlocking-Tile Snow Guards
The Gough Interlocking Book Tile Snow Guard Model SGBK is designed to be installed on new and existing Ludowici Clay "book" roof tile. This snow guard is made of 24oz. cold rolled copper. The upper strap is 32 oz. cold rolled copper. The hook at the top will fit up to 5/8" thick tile.
It is fitted close to the tile so as not to hold up the row of tile above it. It includes two vertical pedestals of double 24 oz. copper making it the strongest, most stable, snow guard on the market. The wide, flat copper base allows the guard to hug close to the tile. Its medium height provides stability.
It weighs 5.7 oz., is 8 3/4" long, has a 3 1/4" wide face, and protrudes up from roof about 1 3/8". Also available in lead-coated copper or powder-coated at additional cost. Custom sizes are available as well.
This item requires at least one week lead time and is non-returnable.Fitrite Bronze Bracket for Spanish Tile
Fitrite 532 3-Pipe Bronze Bracket for Spanish Tile roofs.
The brackets match the Ludowici "Spanish 13" tiles.
This item is a special order item that requires a 6-8 week lead time and is non-returnable and non-refundable. You will need to provide a sample tile for an exact match. Space two to four feet apart horizontally depending on roof slope and snow load.
Additional Items for 3- Pipe Bronze Brackets:
RBP1050-12: 12' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $333.00RBP1050-6: 6' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $166.00
RBPCON1050: 3/4" Brass Pipe Couplings are $9.00 each.
RBTEC1050: 3/4" Brass Pipe End Caps are $9.00 each.Ludowici Spanish tiles come in two sizes: Spanish 13, and Spanish 18:
Spanish 13: These tiles are 9 3/4"w X 13 1/4"h overall. They have an exposure of 8 1/4"w and 10 1/4"h. Install the brackets every four tiles to space them 33" apart. Install them every 5 tiles to space them 41 1/4" apart.Spanish 18: These tiles are 9 3/4"w X 18 3/8"h overall and will not fit this bracket. They have an exposure of 8 1/4"w X 15 3/8"h.We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
Fitrite Aluminum French Tile Bracket
SGFR631 Fitrite #631 3-pipe Aluminum Alloy Snow Fence Bracket for French Tile.
Aluminum brackets require galvanized pipes. 3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings. This item is a special order item that requires a 6-8 week lead time. Since this product is made to order it is non-returnable and non-refundable. We will need a sample tile to make sure the brackets are the correct size. Space two to four feet apart horizontally depending on roof slope and snow load.
ADDITIONAL ITEMS:
GLP1050-10: 10' section of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets are $72.00.
GPCON1050: 3/4" Galvanized Pipe Couplings are $6.00 each.
GPEC1050: 3/4" Galvanized Pipe End Capsare $6.00 each.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
Fitrite Bronze Bracket for French Tile
Fitrite #632S 3-pipe bronze snow fence bracket for short French Tile.
This item is a special order item that requires a 4-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on roof slope and snow load.
Additional Items for Bronze Brackets:
RBP1050-12: 12' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $333.00RBP1050-6: 6' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $166.00
RBPCON1050: 3/4" I.D. Brass Pipe Couplings are $9.00 each.
RBTEC1050: 3/4" I.D. Brass Pipe End Caps are $9.00 each.We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.