Tile Roofs

We sell snow guards for tile roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet! 

Items: 19 of 9
  • Alpine PD10 Copper Snow Guards

    Not rated yet

    Pad area: 2 3/8" L x 2 3/8" W (at widest point) x 1 7/16" H; Strap length: 15 5/8"

    Our riveted "fish head" design means optimum strength with no risk of unfolding. Thin, yet durable strap minimizes disruption of slate/shingle pattern while allowing secure mechanical attachment to the structural deck. Allows snow and ice to drop off in small amounts or melt completely. Protects against snow damage at the lower roof level (gutters, valleys, crickets, roof protrusions, plumbing vents, etc...) and at ground level (cars, people, landscaping, pets, walkways, ground mounted mechanical units).

    Applicable roof types: New Slate, New Synthetic Shingles, New Composition Shingle, New Cedar Shingle, New Flat Tile, New Spanish Tile, Existing Spanish Tile

    • $9.00
  • Mullane 200CPT Retrofit Snow Guards

    Not rated yet
    The Mullane 200 CPT retrofit snow guard for tile roofs is designed to be installed on existing tile roofs with tiles up to 5/8" (0.625) inches thick with headlaps up to 3.5 inches. The shoe is cast bronze and the strap is 24-ounce cold-rolled copper.

    Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

    All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. The castings are produced locally by old-world craftsmen using state of the art equipment to assure that each casting is of consistent quality. The final assembly is done by hand, using only solid copper rivets, so that each finished product is of uniform quality.


    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    • $16.95
  • Gough SGBK Tile Roof Snow Guards

    Not rated yet

    The Gough English Tile Snow Guard Model SGBK is designed to be installed on new and existing Ludowici Clay "book" roof tile. This snow guard is made of 24oz. cold rolled copper. The upper strap is 32 oz. cold rolled copper. The hook at the top will fit up to 5/8" thick tile.

    It is fitted close to the tile so as not to hold up the row of tile above it. It includes two vertical pedestals of double 24 oz. copper making it the strongest, most stable, snow guard on the market. The wide, flat copper base allows the guard to hug close to the tile. Its medium height provides stability. 

    It weighs 5.7 oz., is 8 3/4" long, has a 3 1/4" wide face, and protrudes up from roof about 1 3/8". Also available in lead-coated copper or powder-coated at additional cost. Custom sizes are available as well.


    This item requires at least one week lead time and is non-returnable.
    • $13.00
  • Gough SGSP Tile Roof Snow Guards

    Not rated yet
    Gough Spanish Tile Snow Guard Model #SGSP is designed to be installed on new and existing Spanish tile roofs. This snow guard is made of 24 oz. cold rolled copper. The flat copper base allows the guard to hug close to the tile. The hook at the top will fit up to 1/2" thick tile.

    It weighs 5 oz., is 8 1/2" long, has a 3 1/4" wide face, and protrudes up from roof about 2 1/8". Also available in lead-coated copper or powder-coated at additional cost. Custom sizes are available as well.

    Options:

    SGSP8 - 8.5" - $13.50
    SGSP11 - 11.5" - $15.00

    This item requires at least one week lead time and is not returnable.
    • $13.50
  • Fitrite 521/531 Snow Rails for Spanish Tile

    Not rated yet

    Mullane Fitrite 521/531 Aluminum Snow Rail Brackets for Spanish Tile roofs.

    Select for 2 or 3 pipes and shorter or longer Spanish tiles below. The long and short brackets match the Ludowici short and long Spanish tiles: Spanish 13, and Spanish 18. Aluminum brackets require galvanized pipes. 2-pipe brackets use 1/2" pipes and fittings. 3-pipe brackets use 3/4" pipe and fittings.

    OPTIONS:

    FR521S 2-Pipe Short Tile - $195.00

    FR521L 2-Pipe Long Tile - $200.00

    FR531S 3-Pipe Short Tile - $215.00

    FR531L 3-Pipe Long Tile - $225.00

    This item is a special order item that requires a 6-8 week lead time. Since this product is made to order it is non-returnable and non-refundable. We will need a sample tile to make sure the brackets are the correct size.

    ADDITIONAL ITEMS:

    For 2-Pipe Brackets:

    GLP800-10: 10' section of 1/2" Galvanized Pipe for 2-pipe brackets are $46.00.

    GPCON800: 1/2" Galvanized Pipe Couplings are $3.20

    GPEC800: 1/2" Galvanized Pipe End Caps are $3.20 each.

    For 3-Pipe Brackets:

    GLP1050-10: 10' section of 3/4" Galvanized Pipe for 3-pipe brackets are $53.00

    GPCON1050: 3/4" Galvanized Pipe Couplings are $4.00 each.

    GPEC1050: 3/4" Galvanized Pipe End Caps are $4.00 each.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $195.00
  • Fitrite 532 Bronze Bracket for Spanish Tile

    Not rated yet

    Fitrite 532 3-Pipe Bronze Bracket for Spanish Tile roofs. 

    The brackets match the Ludowici "Spanish 13" tiles.

    This item is a special order item that requires a 6-8 week lead time and is non-returnable and non-refundable. You will need to provide a sample tile for an exact match. Space two to four feet apart horizontally depending on roof slope and snow load.

    Additional Items for 3- Pipe Bronze Brackets:

    RBP1050-12: 12' section of 3/4" Brass Pipe for 3-pipe brackets are $225.00

    RBPCON1050: 3/4" Brass Pipe Couplings are $6.50 each.  

    RBTEC1050: 3/4" Brass Pipe End Caps are $6.50 each. 

    Spanish 13: These tiles are 9 3/4"w X 13 1/4"h overall. They have an exposure of 8 1/4"w and 10 1/4"h. Install the brackets every four tiles to space them 33" apart. Install them every 5 tiles to space them 41 1/4" apart. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $354.10
  • Fitrite 631 Aluminum French Tile Bracket

    Not rated yet

    SGFR631 Fitrite #631 3-pipe Aluminum Alloy Snow Fence Bracket for French Tile.

    Aluminum brackets require galvanized pipes. 3-pipe brackets use 3/4" pipe and fittings. This item is a special order item that requires a 6-8 week lead time. Since this product is made to order it is non-returnable and non-refundable. We will need a sample tile to make sure the brackets are the correct size. Space two to four feet apart horizontally depending on roof slope and snow load.

    ADDITIONAL ITEMS:

    GLP1050-10: 10' section of 3/4" Galvanized Pipe for 3-pipe brackets are $53.00

    GPCON1050: 3/4" Galvanized Pipe Couplings are $4.00 each.

    GPEC1050: 3/4" Galvanized Pipe End Caps are $4.00 each.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $199.00
  • Fitrite 632 Bronze Bracket for French Tile

    Not rated yet

    Fitrite #632 3-pipe bronze snow fence bracket for French Tile.

    This item is a special order item that requires a 4-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on roof slope and snow load.

    Additional Items for Bronze Brackets:

    RBP1050-12: 12' section of 3/4" Brass Pipe for 3-pipe brackets are $225.00

    RBPCON1050: 3/4" Brass Pipe Couplings are $6.50 each.  

    RBTEC1050: 3/4" Brass Pipe End Caps are $6.50 each. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $351.00
  • Fitrite 831 Brackets for Designer Tile

    Not rated yet

    Fitrite 831 Aluminum Brackets for Designer Tile

    3-pipe brackets use 3/4" pipe and fittings. Aluminum brackets require galvanized pipes. 

    This is a special order item that may require a 6-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on roof slope and snow load.

    ADDITIONAL ITEMS:

    GLP1050-10: 10' section of 3/4" Galvanized Pipe for 3-pipe brackets are $53.00

    GPCON1050: 3/4" Galvanized Pipe Couplings are $4.00 each.

    GPEC1050: 3/4" Galvanized Pipe End Caps are $4.00 each.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $225.00