Snow Rails

We sell snow rails for roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet! 

  • Fusion Guard Snow Guard

    Alpine Fusion Guard Hybrid Snow Guard

    Available in stainless steel, or red brass, as well as powder-coated aluminum, and cold-rolled powder-coated steel. 

    10 7/8" "reach" to nail. More about retrofit snow guard "reach."

    The strap is 18" long, but also available in multiple lengths to accommodate various roofing materials as well as retrofit applications. It is a retrofit style snow guard (they can be installed on existing roofs), or they can be installed on new roofs. See supporting documents below for measurements and installation instructions. Stiffening ribs on the front of the snow guard add rigidity and strength.

    Ideal for residential customers who don't want the look of a pipe-style system on their roof, but want to be able to add horizontal rods to their snow guards should they be needed. Protects against snow damage to gutters, valleys, crickets, roof protrusions, plumbing vents, cars, people, landscaping, pets, walkways, ground-mounted mechanical units, and so on.

    Rods and rod clamps are optional and are sold separately. 

    RD77-SS: 6' long, 3/8" stainless rods are $25.00 +shipping 
    RD77-BR: 6' long, 3/8" brass rods are $46.00 +shipping
    RD87-SS: Stainless couplings are $6.00
    RD87-BR: Brass couplings are $7.50
    RD65-AL: Powder-coated aluminum end collars are $7.85 
    RD65-SS: Stainless end collars are $7.99

    OPTIONS:

    Cold Rolled Steel pre-painted dark bronze (Fusion-Guard-Gray): $7.00

    Aluminum Powder Coated Dark Bronze (Fusion-Guard-AL-STB): $7.00

    Aluminum Powder Coated Graphite Gray (Fusion-Guard-AL-GRAY): $7.00

    See the color chart for color options (custom colors are available).

    0.0
    Add first review
    Not rated yet
    • $7.00
  • Snow Bird Hybrid Snow Guards

    This is a retrofit snow guard that can be used on new roofs or existing roofs. Available in Brass, or Galvanized Steel (Mill Finish or Powder Coated Dark Bronze). 

    13" maximum "reach " to nail. More about retrofit snow guard "reach."

    The Snow Bird Hybrid Snow Guard allows you to add optional 3/8" solid horizontal rods during or after the install. Stiffening ribs on the front of the pad add rigidity and strength while allowing the rods to sit static. The strap is 18" long, but also available in multiple lengths to accommodate various roofing materials as well as retrofit applications. It is ideal for residential customers who don't want the look of a pipe-style system on their roof, but want the benefits a pipe-style system provides. It protects against snow damage to gutters, valleys, crickets, roof protrusions, plumbing vents, cars, people, landscaping, pets, walkways, ground mounted mechanical units. 
     
     

    See supporting documents below for measurements and installation instructions. 

    Roof types: New Slate, Existing Slate, New Synthetic Shingles or Shakes, Existing Synthetic Slate or Shake, New Composition Shingle, Existing Composition Shingle, New Cedar Shingle, Existing Cedar Shingle, New Flat Tile, Existing Flat Tile, New French Tile, Existing French Tile, New Spanish Tile, Existing Spanish Tile, New Rounded Tile, Existing Rounded Tile.
     

    Rods and rod clamps are optional and are sold separately: 
     

    RD77-SS: 6' 3/8" stainless rods are $25.00 +shipping 
    RD77-BR: Six-foot 3/8" brass rods are $46.00 +shipping  
    RD87-SS: Stainless couplings are $6.00
    RD87-BR: Brass couplings are $7.50
    RD65-AL: Powder-coated aluminum end collars are $7.85 
    RD65-SS: Stainless end collars are $7.99

    SNOW BIRD OPTIONS:

    Brass (Snow-Bird-BR): $22.50

    Copper Coated Stainless Steel (Snow-Bird-SSCU) $22.50

    Galvanized Steel Mill Finish (Snow-Bird-GAL): $9.50

    Galvanized Steel Powder Coated Dark Bronze (Snow-Bird-GAL-STB): $12.00     

    Galvanized Steel Powder Coated Your Color Choice: See the color chart below for special order powder coating colors. State the color in the customer comments section at checkout. This requires an 2-3-week lead time.

    NOTE: Returned Alpine snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project.           

    0.0
    Add first review
    Not rated yet
    • $9.50
  • Sieger 3-Pipe Rail Brackets

    Sieger 3-Pipe Snow Rail Brackets for roofs are available in bronze, aluminum, or galvanized iron. This is the heavy-duty pipe bracket only. This guard uses three 1/2" diameter pipes or solid bars, which are not included.

    5½" high, 3" wide at base, 14" long with strap, 3/16" x 1" strap. 

    BRACKETS SHOULD BE PLACED NO MORE THAN 3' APART FOR IRON OR BRONZE, AND 2' APART FOR ALUMINUM 

    Buy heavy-duty "Type K" copper pipe through your plumbing supply outlets in 10' or 20' lengths, or use solid 1/2" copper or brass rods. Copper pipes should be soldered together with couplings using a plumber's torch, wire solder, and paste or liquid flux. For aluminum brackets, use stainless steel pipe.   

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).  


    Bracket Options:

    Aluminum - $21.00

    Galvanized Iron - $31.50

    Bronze - $56.00

    You may need an adhesive/sealant if attaching to a metal roof.

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $21.00
  • Sieger 2-Pipe Standing Seam Brackets

    Sieger 2-Pipe Standing Seam Snow Rail Brackets are 5 3/8" wide overall and stand 3 1/4" high off the roof. These brackets are part of an affordable lifetime snow rail system. Six stainless steel set screws are included with every bracket and are compatible with any standing seam metal roofing type. Requires an 1/8" Allen wrench for installation.       

    Brackets only: rail must be bought separately. For bronze brackets, ask for 1/2" "Type K" copper pipe at your local plumbing supply store, or use solid 1/2" copper or brass rods. Copper pipes can be soldered together with couplings. For aluminum brackets, use stainless steel pipe.  

    For Snap Lock standing seam metal roofing, look for the "SL" in the product code. These slots are tapered to accommodate Snap Lock standing seams.

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).


    Options:

    SS2ACR Aluminum: 1/4" or 3/8" slot; 7/8" deep groove - $16.50.

    SS2BCR Bronze: 1/4" slot; 7/8" deep groove; 25.2 oz. - $39.00.

    SS2ASLCR Aluminum Tapered Slot: 1 3/8" deep groove, tapered 5/16" to 7/16" wide - $20.00.

    SS2BSLCR Bronze Tapered Slot: 1 3/8" deep groove, tapered 5/16" to 7/16" wide - $44.50.
      

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
    5.0
    Score: 5.0 (votes: 2)
    Reviews: 1
    • $16.50
  • E-Rail Standing Seam Snow Brackets

    Berger E-Rail aluminum snow rail bracket for standing seam roofs is available in mill finish or with a black Epoxy Primer. This is a 1 or 2-rail moderate snow load system that is strong and light offering between the seams protection on metal roofs. It helps to control the possibility of dangerous ice slides, requiring no penetration of the roof. This system is easy to install and uses a 7/32 Allen wrench. Watch the video below to see how to install the brackets. The brackets weigh 0.6 lbs each.
     

    The E-Casting is designed to accommodate a seam of up to ½" (0.516”) thick and up to two inches (2") high. 

    Self-Tapping Screws – #8 x 0.5” (stainless steel) are included with the rails (keeps the rail from sliding sideways).   

    Download the BERGER RAIL CALCULATOR to determine the parts you need!      

    Options:

    ECSTSF: Mill Finished Cast Aluminum - the natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing (fits 1 or 2 rails) - $46.00.

    ECSTSFE: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase (fits 1 or 2 rails) - $52.00.

    #TBSS20 Stainless Steel TubingTubing is available in 16-gauge stainless steel, 20 ft. long by 1" square (ASTM-A-554, type 304). Sold in full lengths only, currently at $246.00 each.  

    Tube end caps: (TUBCAP) are available in black plastic at $0.50 each. 

    Our manufacturer charges a flat fee of $350.00 for shipping east of the Mississippi. Free shipping is offered for sufficient quantity orders. Pipes must be shipped by tractor-trailer to a commercial destination. No residential deliveries! Call for pricing (814-786-9085).   
     
     

    See also Berger F-Rail (2-rail).

    See also Berger S-Rail (1-rail). 

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on snow guard orders over $1,000.00. If ordering tubing also you can still receive free shipping if the order is substantial. Call for more details. 

    0.0
    Add first review
    Not rated yet
    • $46.00
  • F-Rail Standing Seam Snow Brackets

    Berger F-Rail aluminum snow rail brackets for standing seam roofs are available in mill finish or with a black epoxy primer. The Berger F-Casting is a device designed to be used with tubing to create a rail system for the prevention of damage caused by the sliding of snow and ice on standing seam metal roofs. 

    This system uses 2 or 3 rails for heavier snow loads. It functions below and above the standing seams, requiring no roof penetration. This system is easy to install and uses a 7/32 Allen wrench. Watch the video below to see how to install the brackets. The brackets weigh 1.4 lbs each.
     

    The F-Casting is designed to accommodate a seam of up to ½" (0.516") thick and up to two inches (2") high. 

    Self-Tapping Screws – #8 x 0.5” (stainless steel) are included with the rails (keeps the rail from sliding sideways). 

    Download the BERGER RAIL CALCULATOR to determine the parts you need!   

    Options: 

    FCSTSF: Mill Finished Cast Aluminum - the natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing. $61.00

    FCSTFE: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase. $67.00

    #TBSS20 Stainless Steel TubingTubing is available in 16-gauge stainless steel, 20 ft. long by 1" square (ASTM-A-554, type 304). Sold in full lengths only, currently at $246.00 each.  

    Tube end caps: (TUBCAP) are available in black plastic at $0.50 each. 

    Our manufacturer charges a flat fee of $350.00 for LTL shipping east of the Mississippi. Free shipping is offered for sufficient quantity orders. Pipes must be shipped by tractor-trailer to a commercial destination. No residential deliveries! Call Joe for pricing (814-786-9085). 
     

     

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on snow guard orders over $1,000.00. If ordering tubing also you can still receive free shipping if the order is substantial. Call for more details. 
    0.0
    Add first review
    Not rated yet
    • $61.00
  • S-Rail Standing Seam Snow Brackets

    Berger S-Rail aluminum snow rail for standing seam roofs are available in Mill Finish or with a black Epoxy Primer. The Berger S-Casting is a device designed to be used with tubing to create a rail system for the prevention of damage caused by the sliding of snow and ice off standing seam metal roofs.  

    This is a 1-rail, low-profile system for standard snow loads. It functions below the standing seams on metal roofs, helping to control the possibility of dangerous ice slides. It requires no penetration of the roof. This system is easy to install and uses a 7/32 Allen wrench. Watch the video below to see how to install the brackets. The brackets weigh 0.55 lbs each.  

    The S-Casting is designed to accommodate a seam of up to ½" (0.516") thick and up to two inches (2") high. 

    Download the BERGER RAIL CALCULATOR to determine the parts you need!   

    Options:

    SCSTSF: Mill Finished Cast Aluminum - the natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing. $37.00

    SCSTSFE:Cast Aluminum Painted Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase. $40.00

    #TBSS20 Stainless Steel Tubing: Tubing is available in 16-gauge stainless steel, 20 ft. long by 1" square (ASTM-A-554, type 304). Sold in full lengths only, currently at $246.00 each.
     

    Tube end caps: (TUBCAP) are available in black plastic at $0.50 each. 

    Our manufacturer charges a flat fee of $350.00 for LTL shipping east of the Mississippi. Free shipping is offered for sufficient quantity orders. Pipes must be shipped by tractor-trailer to a commercial destination. No residential deliveries! Call Joe for pricing (814-786-9085).
     

    See also Berger E-Rail (2-rail) and Berger F-Rail (3-rail)

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on snow guard orders over $1,000.00. If ordering tubing also you can still receive free shipping if the order is substantial. Call for more details. 

    0.0
    Add first review
    Not rated yet
    • $37.00
  • Mullane Fitrite 121ML 2-Pipe Snow Rail Brackets

    Mullane Fitrite #121ML 2-Pipe Galvanized Snow Rail Brackets for slate roofs. 

    The Model #121 Snow Fence Bracket is cast in galvanized malleable iron for durability. The castings are mounted on an 11-gauge galvanized steel plate. The brackets accommodate (2) half-inch (inside diameter) galvanized pipes. The Fitrite #121 is typically installed on slate roofs with rafters not over 18 ft. in areas with moderate snowfalls. Space 2-3 feet apart horizontally.

    The 1/2" I.D. Galvanized pipes, Couplings, and End Caps are sold separately.

    There are 21 plate sizes available  (plate size matches the slate size): select a size in the drop-down list below for pricing.

    This is a special order item that requires a minimum 2-3 week lead time and is non-returnable and non-refundable. 

    ADDITIONAL ITEMS:

    GLP800-10: Berger 10' 1/2" I.D. Galvanized Pipes are $66.00 each

    GPEC800: Berger 1/2" Galvanized Pipe End Caps are $5.00 each

    GPCON800: Berger 1/2" Galvanized Pipe Couplings are $5.00 each


    We offer free shipping on snow guard orders of sufficient amounts. 

    For more information, call us at (814) 786-9085, or send us an email, with the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $123.00
  • Fitrite 122BR 2-Pipe Snow Rail Brackets

    Mullane Fitrite #122BR 2-Pipe Bronze/Brass Snow Rail Bracket for slate roofs. 

    The Model #122 Snow Fence Bracket is cast in bronze for durability. The brackets accommodate two 1/2" I.D. brass pipes. The FR122BR is typically installed on slate roofs with rafters not over 18 ft. in areas with moderate snowfalls.

    1/2" red brass pipe, couplings, and end caps are sold separately or purchase them at your local pipe supplier.

    11 plate sizes available (plate size matches slate size): select a size in the drop-down list below for pricing. Don't see your size? We may still have it available but not listed (see the image of available plate sizes). Call us at 814-786-9085 or send us an email (mail@josephjenkins.com).

    This special order item requires a 2-3 week lead time. It is non-returnable and non-refundable. 

    Additional Items for Bronze Brackets:

    RBP800-12: Berger 1/2" I.D. Brass Pipe 12' Lengths are $297.00 each

    RBPCON800: 
    Berger 1/2" Brass Pipe Coupling are $7.00 each

    RBTEC800: 
    Berger 1/2" Brass Pipe End Caps are $7.00 each
     

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on snow guard orders over $1,000.00.
    0.0
    Add first review
    Not rated yet
    • $191.00
  • Fitrite 124 2-Pipe Snow Rail Brackets

    Mullane Fitrite #124 2-Pipe Bronze or Galvanized Snow Rail Bracket for asphalt shingle roofs. 

    The FR124 Mini Protector Snow Fence Bracket is available in malleable galvanized iron or cast bronze mounted on a brass plate. The castings are mounted on a 2" x 12" plate with pre-drilled holes for easy installation. The bracket assembly is set up to accommodate two 1/2" I.D. pipes (use galvanized pipes with the iron bracket and brass with the bronze bracket). Brackets are adjustable to the roof pitch. The FR124 should be used only where low to moderate snow loads are anticipated and can be mounted to most any roof surface. 

    If you want a 2-pipe snow rail bracket for slate roofs, use the Galvanized FR121  or the Bronze FR122. The brackets are sized the same as the slate size.  

    1/2" I.D. red brass pipe or 1/2" galvanized pipe, couplings, and end caps are sold separately.


    OPTIONS:

    FR124ML: Galvanized is $96.00

    FR124BRZ: Bronze is $183.00

    ADDITIONAL ITEMS:

    GLP800-10: 10' sections of 1/2" I.D. Galvanized Pipe for 2-pipe brackets are $66.00

    GPCON800: 1/2" Galvanized Pipe Couplings are $5.00 each

    GPEC800: 1/2" Galvanized Pipe End Caps are $5.00 each 


    RBP800-12: Berger 1/2" I.D. Brass Pipe 12' Lengths are $297.00 each

    RBPCON800: Berger 1/2" Brass Pipe Coupling are $7.00 each

    RBTEC800: Berger 1/2" Brass Pipe End Caps are $7.00 each


    This special order item requires a lead time. Call us at (814) 786-9085 to inquire about what the lead time currently is. It is non-returnable and non-refundable. 

    Snow rails are used along the perimeter of slate roofs for the prevention of sudden and unexpected ice and snow avalanches, which can damage people, cars, shrubbery, lower roofs, and other property underneath. The rail system can also include stainless steel expanded metal to prevent slates and other debris from sliding under the rails and creating a hazard. Also, a standard field array of snow guards can be included on the field of the roof above the snow rail for maximum protection.

    Snow rail fence brackets are installed parallel to and approximately 24-36 inches above the eaves. The brackets should be spaced from 18-24 inches to no more than 42-48 inches apart horizontally, depending on the pitch of the roof and the expected snow load. It is recommended to use through bolts with a backer plate on the underside of the roof deck. Bronze, brass, or stainless steel pipe is recommended. Copper water pipes should not be used with Mullane snow rails, although they are used with Sieger snow rail brackets, both for 
    slate roofs and for standing seam roofs

    High snow load areas should use a three-pipe system such as the Mullane 500, the Mullane Fitrite 131 ML, or the Mullane Fitrite 132 BR,  If a smaller system is used, then it should be supplemented with an additional snow guard array in the field of the roof above the snow rail.


    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee.   

    We offer free shipping on orders of sufficient quantity. 

    For more information, call us at (814) 786-9085, or send us an email, and include the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $96.00
  • Fitrite 131ML 3-Pipe Snow Rail Brackets

    Mullane Fitrite #131ML 3-Pipe Galvanized Snow Rail Bracket for slate roofs. 

    The Model #131 Snow Fence Bracket is cast from malleable iron and zinc plated for durability. The castings have been carefully engineered to assure maximum strength at the points of the greatest stress when under load. The Model #131 accommodates 3 galvanized iron, bronze, brass, or stainless-steel pipes. It is for use on large slate and shingle roofs with rafters up to 25 ft. long. The brackets are adjustable to various roof pitches.

    Install snow fence bracket parallel to the eaves, spacing the brackets from 24" to no more than 48" apart, depending upon the pitch of the roof and the anticipated snow load. Install brackets approximately 24" to 36" from the roof edge. 

    The base plate is 11-gauge galvanized steel, sized to the slate dimension (select size below), and pre-drilled and countersunk for fasteners. Bolts are grade 5 zinc-plated steel. 

    3/4" I.D. galvanized pipe, couplings, and end caps are sold separately, or buy them at your local pipe supplier. 

    30 plate sizes available (plate size matches slate size): select a size in the drop-down list below for pricing. See also the available plate sizes listed in the image.

    This item is a special order item that requires a 3-4 week lead time. Since this product is made to order it is non-returnable and non-refundable.

    Additional Items:

    GLP1050-10: 10' section of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets is $72.00

    GPCON1050: 3/4" Galvanized Pipe Couplings are $6.00 each.

    GPEC1050: 3/4" Galvanized Pipe End Caps are $6.00 each.

    We offer free shipping on orders of sufficient quantity. 

    For more information, call us at (814) 786-9085, or send us an email, with the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $171.00
  • Fitrite 132BR 3-Pipe Snow Rail Brackets

    Mullane Fitrite #132BR 3-pipe bronze/brass snow rail bracket for slate roofs.

    The Model #132 Snow Fence Bracket is cast from solid bronze for durability and mounted on a solid brass plate. The castings have been carefully engineered to assure maximum strength at the points of the greatest stress when under load. Model #132 accommodates 3 brass, bronze, or stainless steel pipes. It is for use on small slate roofs with rafters up to 18 ft. long. The brackets are adjustable to various roof pitches. 

    The base plate is a 1/8" brass plate, sized to the slate dimension, and pre-drilled and countersunk for fasteners. The bolts are solid brass. 

    3/4" I.D. Red Brass Pipe, Couplings, and End Caps are sold separately or buy them at your local pipe supplier.

    15 plate sizes available (plate size matches slate size): select the size below for pricing. Don't see your size? We may still have it available but not listed. Call us at 814-786-9085 or send us an email (mail@josephjenkins.com).

    This item is a special order item and the base plate can be fabricated to any specified size, which requires a 2-3 week lead time. It is non-returnable and non-refundable.

    Additional Items:

    RBP1050-12: 12' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets is $333.00.

    RBP1050-6: 6' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets is $166.00.

    RBPCON1050: 3/4" Brass Pipe Couplings are $9.00 each.  

    RBTEC1050: 3/4" Brass Pipe End Caps are $9.00 each. 

    We offer free shipping on snow guard orders of sufficient amounts. 

    For more information, call us at (814) 786-9085, or send us an email, with the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $228.00
  • Mullane 500 3-Pipe Snow Rail Bracket

    Mullane 500 3-Pipe Bronze/Brass Snow Rail Bracket

    The Mullane 500 is a super heavy-duty copper/brass snow rail system used mostly on institutional buildings, government buildings, churches, college dormitories, and anywhere a high liability from falling ice and snow exists. 

    The plates are made to fit the size of the slate on your roof. Common sizes are shown below, but call us at 814-786-9085 or email us for other sizes and shipping costs. This is a special order item that requires a lead time and is non-returnable and non-refundable. Larger orders are eligible for free shipping. 

    Install snow fence brackets parallel to the eaves, spacing the brackets from 24" to no more than 48" apart, depending upon the pitch of the roof and the anticipated snow load. Install brackets approximately 24" to 36" from the roof edge.  

    The Model #500 Snow Fence Bracket is cast from solid bronze and is mounted to a solid brass plate for lifetime durability. The castings have been carefully engineered to assure maximum strength at the points of greatest stress when under load. Double back brace brackets are standard and give redundant protection against casting failure when under load. Holes for rails are 1.125" to accommodate 1" (O.D.) brass pipe. The brackets are adjustable to three angles: 90, 67.5, and 45 degrees. The base plate is 1/8" 220 bronze. 

    Model #500 is typically installed along the perimeter of slate roofs with rafters up to 25 ft. in areas with moderate to high snowfalls. For longer rafter lengths use additional snow rails. Model #500 is a custom order and the base plate can be fabricated to any specified size. We have too many standard sizes to list them all here, so if you need a plate size that is not listed, we probably have it available. Look at the image of the plate size list .

    Options: Choose your plate size below. Don't see your size? We may still have it available but not listed. Call us at 814-786-9085 or send us an email (mail@josephjenkins.com).

    Additional Items:

    RBP1050-12: 12' section of 3/4" I.D. (1" O.D.) brass pipe: $333.00.

    RBP1050-6: 6' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $166.00.    

    RBPCON1050: 1" I.D. Brass Pipe Couplings are $9.00 each.  

    RBTEC1050: 1" I.D. Brass Pipe End Caps are $9.00 each. 

    READ MORE ABOUT SNOW RAILS 

    0.0
    Add first review
    Not rated yet
    • $228.00
  • Fitrite Snow Rails for Spanish Tile

    Mullane Fitrite 521/531 Aluminum Snow Rail Brackets for Spanish Tile roofs.

    Select for 2 or 3 pipes and shorter or longer Spanish tiles below. The long and short brackets match the Ludowici short and long Spanish tiles: Spanish 13, and Spanish 18. Aluminum brackets require galvanized pipes. 2-pipe brackets use 1/2" I.D. pipes and fittings. 3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings.

    OPTIONS:

    FR521S 2-Pipe Short Tile: $333.00

    FR521L 2-Pipe Long Tile: $346.00

    FR531S 3-Pipe Short Tile: $356.00

    FR531L 3-Pipe Long Tile: $396.00

    This item is a special order item that requires a 6-8 week lead time. Since this product is made to order it is non-returnable and non-refundable. We will need a sample tile to make sure the brackets are the correct size.

    ADDITIONAL ITEMS:

    For 2-Pipe Brackets:

    GLP800-10: 10' section of 1/2" I.D. Galvanized Pipe for 2-pipe brackets are $66.00.

    GPCON800: 1/2" Galvanized Pipe Couplings are $5.00 each.

    GPEC800: 1/2" Galvanized Pipe End Caps are $5.00 each.

    For 3-Pipe Brackets:

    GLP1050-10: 10' section of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets is $72.00.

    GPCON1050: 3/4" Galvanized Pipe Couplings are $6.00 each.

    GPEC1050: 3/4" Galvanized Pipe End Capsare $6.00 each.

    Ludowici Spanish tiles come in two sizes: Spanish 13, and Spanish 18:

    Spanish 13: These tiles are 9 3/4"w X 13 1/4"h overall. They have an exposure of 8 1/4"w and 10 1/4"h. Install the brackets every four tiles to space them 33" apart. Install them every 5 tiles to space them 41 1/4" apart.

    Spanish 18: These tiles are 9 3/4"w X 18 3/8"h overall. They have an exposure of 8 1/4"w X 15 3/8"h. Install the brackets every four tiles to space them 33" apart. Install them every 5 tiles to space them 41 1/4" apart.


    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $333.00
  • Fitrite Bronze Bracket for Spanish Tile

    Fitrite 532 3-Pipe Bronze Bracket for Spanish Tile roofs. 

    The brackets match the Ludowici "Spanish 13" tiles.

    This item is a special order item that requires a 6-8 week lead time and is non-returnable and non-refundable. You will need to provide a sample tile for an exact match. Space two to four feet apart horizontally depending on roof slope and snow load.

    Additional Items for 3-Pipe Bronze Brackets:

    RBP1050-12: 12' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $333.00.

    RBP1050-6: 6' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $166.00.    

    RBPCON1050: 3/4" Brass Pipe Couplings are $9.00 each.  

    RBTEC1050: 3/4" Brass Pipe End Caps are $9.00 each. 

    Ludowici Spanish tiles come in two sizes: Spanish 13, and Spanish 18:

    Spanish 13: These tiles are 9 3/4"w X 13 1/4"h overall. They have an exposure of 8 1/4"w and 10 1/4"h. Install the brackets every four tiles to space them 33" apart. Install them every 5 tiles to space them 41 1/4" apart.

    Spanish 18: These tiles are 9 3/4"w X 18 3/8"h overall and will not fit this bracket. They have an exposure of 8 1/4"w X 15 3/8"h. 


    We offer free shipping on orders of sufficient quantity. For more information, call us at  814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $510.00
  • Fitrite 631S Aluminum French Tile Bracket

    FR631S Fitrite #631 3-pipe Aluminum Alloy Snow Fence Bracket for French Tile.  

    Aluminum brackets require galvanized pipes. 3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings. This item is a special order item that requires a 6-8 week lead time. Since this product is made to order it is non-returnable and non-refundable. We will need a sample tile to make sure the brackets are the correct size. Space two to four feet apart horizontally depending on the roof slope and snow load.

    ADDITIONAL ITEMS:

    GLP1050-10: 10' sections of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets are  $72.00. 

    GPCON1050: 3/4" Galvanized Pipe Couplings are $6.00 each.

    GPEC1050: 3/4" Galvanized Pipe End Capsare $6.00 each.  

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $356.00
  • Fitrite 632 Bronze Bracket for French Tile

    Fitrite #632S 3-pipe bronze snow fence bracket for short French Tile.

    This item is a special order item that requires a 4-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on the roof slope and snow load.  

    Additional Items for Bronze Brackets:

    RBP1050-12: 12' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $333.00.
     

    RBP1050-6: 6' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $166.00.

    RBPCON1050: 3/4" I.D.  Brass Pipe Couplings are $9.00 each.  

    RBTEC1050: 3/4" I.D.  Brass Pipe End Caps are $9.00 each. 

     

    We offer free shipping on orders of sufficient quantity. For more information, call us at  814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $506.00
  • Fitrite 832 Brackets for Designer Tile

    Mullane Fitrite 3-Pipe Brackets for Designer Tile   

    Options: 

    #832 Bronze  $735.00

    #832S Short Bronze $482.00

    #831 Aluminum $395.00

    3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings. Aluminum brackets require galvanized pipes. Bronze brackets use brass pipes.

    This is a special order item that may require a 6-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on the roof slope and snow load.

    ADDITIONAL ITEMS:

    GLP1050-10: 10' sections of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets are $72.00.

    GPCON1050: 3/4" I.D. Galvanized Pipe Couplings are $6.00 each.

    GPEC1050: 3/4" I.D. Galvanized Pipe End Caps are $6.00 each.

    RBP1050-12: 12' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $330.00. 

    RBP1050-6: 6' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $166.00    .

    RBPCON1050: 3/4" I.D.  Brass Pipe Couplings are $9.00 each.  

    RBTEC1050: 3/4" I.D.  Brass Pipe End Caps are $9.00 each. 
     
     

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085 or send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $395.00

Footer navigation