Snow Rails

We sell snow rails for roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet! 

Items: 116 of 16
  • Sieger 3-Pipe Rail Brackets

    Not rated yet

    Sieger 3-Pipe Rail Brackets are available in bronze, aluminum, or galvanized iron. This is the heavy-duty pipe bracket only. This guard uses three 1/2" diameter pipes or solid bars, which are not included.

    5½" high, 3" wide at base, 14" long with strap, 3/16" x 1" strap. 

    BRACKETS SHOULD BE PLACED 3' APART FOR IRON OR BRONZE, AND 2' APART FOR ALUMINUM 

    Buy heavy-duty "Type K" copper pipe through your plumbing supply outlets in 10' or 20' lengths, or use solid 1/2" copper or brass rods. Copper pipes should be soldered together with couplings using a plumber's torch, wire solder, and paste or liquid flux. For aluminum brackets, use stainless steel pipe.

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).


    Bracket Options:

    Aluminum - $17.50

    Galvanized Iron - $24.00

    Bronze - $43.00

    You may need an adhesive/sealant if attaching to a metal roof.

    Download instructions showing how to install on an existing slate roof.

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project. 

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted. There is an upcharge of $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), Sieger will hold your order until they have another paint job of the same color, then paint them at that time. It may be a few weeks wait. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
    • $17.50
  • Sieger 2-Pipe Standing Seam Brackets

    Not rated yet

    Sieger 2-Pipe Standing Seam Snow Rail Brackets are 5 3/8" wide overall and stand 3 1/4" high off the roof. These brackets are part of an affordable lifetime snow rail system. Six stainless steel set screws are included with every bracket and are compatible with any standing seam metal roofing type. Requires an 1/8" Allen wrench for installation.        

    Brackets only: rail must be bought separately. For bronze brackets, ask for 1/2" "Type K" copper pipe at your local plumbing supply store, or use solid 1/2" copper or brass rods. Copper pipes can be soldered together with couplings. For aluminum brackets, use stainless steel pipe.  

    For Snap Lock standing seam metal roofing, look for the "SL" in the product code. These slots are tapered to accommodate Snap Lock standing seams.

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).


    Options:

    SS2ACR Aluminum: 1/4" or 3/8" slot; 7/8" deep groove - $14.25.

    SS2BCR Bronze: 1/4" slot; 7/8" deep groove; 25.2 oz. - $29.00.

    SS2ASLCR Aluminum Tapered Slot: 1 3/8" deep groove, tapered 5/16" to 7/16" wide - $15.75.

    SS2BSLCR Bronze Tapered Slot: 1 3/8" deep groove, tapered 5/16" to 7/16" wide - $32.50.
      

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted. There is an upcharge of $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), Sieger will hold your order until they have another paint job of the same color, then paint them at that time. It may be a few weeks wait. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
    • $14.25
  • E-Rail 2-Rail Standing Seam Brackets

    Not rated yet

    Berger E-Rail aluminum snow rail bracket for standing seam roofs is available in mill finish or with a black Epoxy Primer. This is a 1 or 2-rail moderate snow load system that is strong and light offering between the seams protection on metal roofs. It helps to control the possibility of dangerous ice slides, requiring no penetration of the roof. This system is easy to install, and uses a 7/32 Allen wrench. Watch the video below to see how to install the brackets. The brackets weigh 0.6 lbs each.

    The E-Casting is designed to accommodate a seam of up to ½" (0.516”) thick and up to two inches (2") high. 

    Self-Tapping Screws – #8 x 0.5” (stainless steel) are included with the rails (keeps the rail from sliding sideways).

    Download the BERGER RAIL CALCULATOR to determine the parts you need!  

    Options:

    ECSTSF: Mill Finished Cast Aluminum - natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing (fits 1 or 2 rails) - $34.75.

    ECSTSFE: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase (fits 1 or 2 rails) - $39.30.

    #TBSS20 Stainless Steel TubingTubing is available in 16-gauge stainless steel, 20 ft. long by 1" square (ASTM-A-554, type 304). Sold in full lengths only, currently at $203.00 each. 

    Tube end caps: (TUBCAP) available in black plastic at $0.28 each. 

    Our manufacturer charges a flat fee of $350.00 for shipping east of the Mississippi. Free shipping is offered for sufficient quantity orders. Pipes must be shipped by tractor trailer to a commercial destination. No residential deliveries! Call Joe for pricing (814-786-9085). 

    See also Berger F-Rail (2-rail).

    See also Berger S-Rail (1-rail).

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    • $34.75
  • F-Rail 3-Rail Standing Seam Brackets

    Not rated yet

    Berger F-Rail aluminum snow rail brackets for standing seam roofs are available in mill finish or with a black epoxy primer. The Berger F-Casting is a device designed to be used with tubing to create a rail system for the prevention of damage caused by the sliding of snow and ice on standing seam metal roofs. This system uses 2 or 3 rails for heavier snow loads. It functions below and above the standing seams, requiring no roof penetration. This system is easy to install, and uses a 7/32 Allen wrench. Watch the video below to see how to install the brackets. The brackets weigh 1.4 lbs each.

    The F-Casting is designed to accommodate a seam of up to ½" (0.516") thick and up to two inches (2") high. 

    Self-Tapping Screws – #8 x 0.5” (stainless steel) are included with the rails (keeps the rail from sliding sideways).

    Download the BERGER RAIL CALCULATOR to determine the parts you need!

    Options: 

    FCSTSF: Mill Finished Cast Aluminum - natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing. $45.95

    FCSTFE: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase. $50.00

    #TBSS20 Stainless Steel TubingTubing is available in 16-gauge stainless steel, 20 ft. long by 1" square (ASTM-A-554, type 304). Sold in full lengths only, currently at $203.00 each. 

    Tube end caps: (TUBCAP) available in black plastic at $0.28 each. 

    Our manufacturer charges a flat fee of $350.00 for LTL shipping east of the Mississippi. Free shipping is offered for sufficient quantity orders. Pipes must be shipped by tractor trailer to a commercial destination. No residential deliveries! Call Joe for pricing (814-786-9085). 

     

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.
    • $45.95
  • S-Rail 1-Rail Standing Seam Brackets

    Not rated yet

    Berger S-Rail aluminum snow rail for standing seam roofs are available in Mill Finish or with a black Epoxy Primer. The Berger S-Casting is a device designed to be used with tubing to create a rail system for the prevention of damage caused by the sliding of snow and ice off standing seam metal roofs. This is a 1-rail, low-profile system for standard snow loads. It functions below the standing seams on metal roofs, helping to control the possibility of dangerous ice slides. It requires no penetration of the roof. This system is easy to install, and uses a 7/32 Allen wrench. Watch the video below to see how to install the brackets. The brackets weigh 0.55 lbs each.

    Self-Tapping Screws – #8 x 0.5” (stainless steel) are included with the rails (keeps the rail from sliding sideways).

    The S-Casting is designed to accommodate a seam of up to ½" (0.516") thick and up to two inches (2") high. 

    Download the BERGER RAIL CALCULATOR to determine the parts you need!

    Options:

    SCSTSF: Mill Finished Cast Aluminum - natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing. $27.75

    SCSTSFE: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase. $30.40

    #TBSS20 Stainless Steel Tubing: Tubing is available in 16-gauge stainless steel, 20 ft. long by 1" square (ASTM-A-554, type 304). Sold in full lengths only, currently at $203.00 each.

    Tube end caps: (TUBCAP) available in black plastic at $0.28 each. 

    Our manufacturer charges a flat fee of $350.00 for LTL shipping east of the Mississippi. Free shipping is offered for sufficient quantity orders. Pipes must be shipped by tractor trailer to a commercial destination. No residential deliveries! Call Joe for pricing (814-786-9085).

    See also Berger E-Rail (2-rail) and Berger F-Rail (3-rail)

    NOTE: Returned Berger snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    • $27.75
  • Fitrite 121ML 2-Pipe Snow Rail Brackets

    Not rated yet
    Mullane Fitrite #121ML 2-Pipe Galvanized Snow Rail Brackets for slate roofs. 

    The Model #121 Snow Fence Bracket is cast in galvanized malleable iron for durability. The castings are mounted on an 11-gauge galvanized steel plate. The brackets accommodate (2) half inch (inside diameter) galvanized pipes. The Fitrite #121 is typically installed on slate roofs with rafters not over 18 ft. in areas with moderate snow falls. Space 2-3 feet apart horizontally.

    The 1/2" I.D. Galvanized Pipe, Couplings and End Caps are sold separately.

    There are 21 plate sizes available  (plate size matches the slate size): select size in drop-down list below for pricing.

    This is a special order item that requires a minimum 2-3 week lead time, and is non-returnable and non-refundable. 

    ADDITIONAL ITEMS:

    GLP800-10: Berger 10' 1/2" I.D. Galvanized Pipe are $57.50 each

    GPEC800: Berger 1/2" Galvanized Pipe End Caps are $4.00 each

    GPCON800: Berger 1/2" Galvanized Pipe Couplings are $4.00 each
    • $102.00
  • Fitrite 122BR 2-Pipe Snow Rail Brackets

    Not rated yet
    Mullane Fitrite #122BR 2-Pipe Bronze/Brass Snow Rail Bracket for slate roofs. 

    The Model #122 Snow Fence Bracket is cast in bronze for durability. The brackets accommodate two 1/2" I.D. brass pipes. The FR121BR is typically installed on slate roofs with rafters not over 18 ft. in areas with moderate snow falls.

    1/2" red brass pipe, couplings and end caps are sold separately, or buy them at your local pipe supplier.

    11 plate sizes available (plate size matches slate size): select size in drop-down list below for pricing. Don't see your size? We may still have it available but not listed (see image of available plate sizes). Call us at 814-786-9085 or send us an email (mail@josephjenkins.com).

    This special order item requires a 2-3 week lead time. It is non-returnable and non-refundable. 

    Additional Items for Bronze Brackets:

    RBP800-12: Berger 1/2" I.D. Brass Pipe 12' Lengths are $239.00 each

    RBPCON800: 
    Berger 1/2" Brass Pipe Coupling are $5.50 each

    RBTEC800: 
    Berger 1/2" Brass Pipe End Caps are $5.50 each
     

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.
    • $154.00
  • Fitrite 124 2-Pipe Snow Rail Brackets

    Not rated yet

    Mullane Fitrite #124 2-Pipe Bronze or Galvanized Snow Rail Bracket for asphalt shingle roofs. 

    The FR124 Mini Protector Snow Fence Bracket is available in malleable galvanized iron or cast bronze mounted on a brass plate. The castings are mounted on a 2" x 12" plate with pre-drilled holes for easy installation. The bracket assembly is set up to accommodate two 1/2" I.D. pipes (use galvanized pipes with the iron bracket and brass with the bronze bracket). Brackets are adjustable to the roof pitch. The FR124 should be used only where low to moderate snow loads are anticipated and can be mounted to most any roof surface.

    If you want a 2-pipe snow rail bracket for slate roofs, use the Galvanized FR121 or the Bronze FR122. The brackets are sized the same as the slate size.  

    1/2" I.D. red brass pipe or 1/2" galvanized pipe, couplings and end caps are sold separately.


    OPTIONS:

    FR124ML: Galvanized

    FR124BRZ: Bronze

    ADDITIONAL ITEMS:

    GLP800-10: 10' section of 1/2" I.D. Galvanized Pipe for 2-pipe brackets are $57.50

    GPCON800: 1/2" Galvanized Pipe Couplings are $4.00

    GPEC800: 1/2" Galvanized Pipe End Caps are $4.00 each 


    RBP800-12: Berger 1/2" I.D. Brass Pipe 12' Lengths are $239.00 each

    RBPCON800: Berger 1/2" Brass Pipe Coupling are $5.50 each

    RBTEC800: Berger 1/2" Brass Pipe End Caps are $5.50 each


    This special order item requires a 2-3 week lead time. It is non-returnable and non-refundable. 

    Snow rails are used along the perimeter of slate roofs for the prevention of sudden and unexpected ice and snow avalanches, which can damage people, cars, shrubbery, lower roofs, and other property underneath. The rail system can also include stainless steel expanded metal to prevent slates and other debris from sliding under the rails and creating a hazard. Also, a standard field array of snow guards can be included on the field of the roof above the snow rail for maximum protection.

    Snow rail fence brackets are installed parallel to, and approximately 24-36 inches above the eaves. The brackets should be spaced from 18-24 inches to no more than 42-48 inches apart horizontally, depending on the pitch of the roof and the expected snow load. It is recommended to use through bolts with a backer plate on the underside of the roof deck. Bronze, brass or stainless-steel pipe is recommended. Copper water pipe should not be used with Mullane snow rails, although they are used with Sieger snow rail brackets, both for 
    slate roofs, and for standing seam roofs

    High snow load areas should use a three pipe system such as the Mullane 500, the Mullane Fitrite 131 ML, or the Mullane Fitrite 132 BR,  If a smaller system is used, then it should be supplemented with an additional snow guard array in the field of the roof above the snow rail.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email  and include the item, quantity, and shipping zip code.
    • $80.00
  • Fitrite 131ML 3-Pipe Snow Rail Brackets

    Not rated yet

    Mullane Fitrite #131ML 3-Pipe Galvanized Snow Rail Bracket for slate roofs. 

    The Model #131 Snow Fence Bracket is cast from malleable iron and zinc plated for durability. The castings have been carefully engineered to assure maximum strength at the points of the greatest stress when under load. The Model #131 accommodates 3 galvanized iron, bronze, brass, or stainless-steel pipes. It is for use on large slate and shingle roofs with rafters up to 25 ft. long. The brackets are adjustable to various roof pitches. 

    The base plate is 11-gauge galvanized steel, sized to the slate dimension (select size below), and pre-drilled and countersunk for fasteners. Bolts are grade 5 zinc-plated steel. 

    3/4" I.D. galvanized pipe, couplings, and end caps are sold separately, or buy them at your local pipe supplier. 

    30 plate sizes available (plate size matches slate size): select size in drop-down list below for pricing. See also the available plate sizes listed on the image.

    This item is a special order item that requires a 2-3 week lead time. Since this product is made to order it is non-returnable and non-refundable.

    Additional Items:

    GLP1050-10: 10' section of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets are $63.00

    GPCON1050: 3/4" Galvanized Pipe Couplings are $5.00 each.

    GPEC1050: 3/4" Galvanized Pipe End Caps are $5.00 each.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
    • $141.00
  • Fitrite 132BR 3-Pipe Snow Rail Brackets

    Not rated yet
    Mullane Fitrite #132BR 3-pipe bronze/brass snow rail bracket for slate roofs.

    The Model #132 Snow Fence Bracket is cast from solid bronze for durability and mounted on a solid brass plate. The castings have been carefully engineered to assure maximum strength at the points of the greatest stress when under load. The Model #132 accommodates 3 brass, bronze, or stainless steel pipes. It is for use on small slate roofs with rafters up to 18 ft. long. The brackets are adjustable to various roof pitches. 

    The base plate is 1/8" brass plate, sized to the slate dimension, and pre-drilled and countersunk for fasteners. Bolts are solid brass. 

    3/4" I.D. Red Brass Pipe, Couplings and End Caps sold separately, or buy them at your local pipe supplier.

    15 plate sizes available (plate size matches slate size): select size below for pricing. Don't see your size? We may still have it available but not listed. Call us at 814-786-9085 or send us an email (mail@josephjenkins.com).

    This item is a special order item and the base plate can be fabricated to any specified size, which requires a 2-3 week lead time. It is non-returnable and non-refundable.

    Additional Items:

    RBP1050-12: 12' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $290.00

    RBP1050-6: 6' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $145.00

    RBPCON1050: 3/4" Brass Pipe Couplings are $7.70 each.  

    RBTEC1050: 3/4" Brass Pipe End Caps are $7.70 each. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $182.00
  • Mullane 500 3-Pipe Snow Rail Bracket

    Not rated yet

    Mullane 500 3-Pipe Bronze/Brass Snow Rail Bracket

    The Mullane 500 is a super heavy-duty copper/brass snow rail system used mostly on institutional buildings, government buildings, churches, college dormitories, and anywhere a high liability from falling ice and snow exists. 

    The plates are made to fit the size of the slate on your roof. Common sizes are shown below, but call us at 814-786-9085 or email for other sizes and for shipping costs. This is a special order item that requires a 2-3 week lead time, and is non-returnable and non-refundable. Larger orders are eligible for free shipping.

    Install snow fence bracket parallel to the eaves, spacing the brackets from 24" to no more than 48" apart, depending upon the pitch of the roof and the anticipated snow load. Install brackets approximately 24" to 36" from the roof edge.  

    The Model #500 Snow Fence Bracket is cast from solid bronze and is mounted to a solid brass plate for lifetime durability. The castings have been carefully engineered to assure maximum strength at the points of greatest stress when under load. Double back brace brackets are standard, and give redundant protection against casting failure when under load. Holes for rails are 1.125" to accommodate 1" (O.D.) brass pipe. The brackets are adjustable to three angles: 90, 67.5, and 45 degrees. The base plate is 1/8" 220 bronze. 

    The Model #500 is typically installed along the perimeter of slate roofs with rafters up to 25 ft. in areas with moderate to high snow falls. For longer rafter lengths use additional snow rails. The Model #500 is a custom order and the base plate can be fabricated to any specified size. We have too many standard sizes to list them all here, so if you need a plate size that is not listed, we probably have it available. Look at the image of the plate size list.

    Options: Choose your plate size below. Don't see your size? We may still have it available but not listed. Call us at 814-786-9085 or send us an email (mail@josephjenkins.com).

    Additional Items:

    RBP1050-12: 12 foot long section of 3/4" I.D. (1" O.D.) brass pipe: $290.00

    RBP1050-6: 6' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $145.00

    RBPCON1050: 3/4" I.D. Brass Pipe Couplings are $7.70 each.  

    RBTEC1050: 3/4" I.D. Brass Pipe End Caps are $7.70 each. 

    READ MORE ABOUT SNOW RAILS 

    • $180.00
  • Fitrite 521/531 Snow Rails for Spanish Tile

    Not rated yet

    Mullane Fitrite 521/531 Aluminum Snow Rail Brackets for Spanish Tile roofs.

    Select for 2 or 3 pipes and shorter or longer Spanish tiles below. The long and short brackets match the Ludowici short and long Spanish tiles: Spanish 13, and Spanish 18. Aluminum brackets require galvanized pipes. 2-pipe brackets use 1/2" I.D. pipes and fittings. 3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings.

    OPTIONS:

    FR521S 2-Pipe Short Tile: $251.00

    FR521L 2-Pipe Long Tile: $260.00

    FR531S 3-Pipe Short Tile: $268.00

    FR531L 3-Pipe Long Tile: $298.00

    This item is a special order item that requires a 6-8 week lead time. Since this product is made to order it is non-returnable and non-refundable. We will need a sample tile to make sure the brackets are the correct size.

    ADDITIONAL ITEMS:

    For 2-Pipe Brackets:

    GLP800-10: 10' section of 1/2" I.D. Galvanized Pipe for 2-pipe brackets are $57.50.

    GPCON800: 1/2" Galvanized Pipe Couplings are $4.00.

    GPEC800: 1/2" Galvanized Pipe End Caps are $4.00 each.

    For 3-Pipe Brackets:

    GLP1050-10: 10' section of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets are $63.00.

    GPCON1050: 3/4" Galvanized Pipe Couplings are $5.00 each.

    GPEC1050: 3/4" Galvanized Pipe End Caps are $5.00 each.

    Ludowici Spanish tiles come in two sizes: Spanish 13, and Spanish 18:

    Spanish 13: These tiles are 9 3/4"w X 13 1/4"h overall. They have an exposure of 8 1/4"w and 10 1/4"h. Install the brackets every four tiles to space them 33" apart. Install them every 5 tiles to space them 41 1/4" apart.

    Spanish 18: These tiles are 9 3/4"w X 18 3/8"h overall. They have an exposure of 8 1/4"w X 15 3/8"h. Install the brackets every four tiles to space them 33" apart. Install them every 5 tiles to space them 41 1/4" apart.


    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $251.00
  • Fitrite 532S Bronze Bracket for Spanish Tile

    Not rated yet

    Fitrite 532 3-Pipe Bronze Bracket for Spanish Tile roofs. 

    The brackets match the Ludowici "Spanish 13" tiles.

    This item is a special order item that requires a 6-8 week lead time and is non-returnable and non-refundable. You will need to provide a sample tile for an exact match. Space two to four feet apart horizontally depending on roof slope and snow load.

    Additional Items for 3- Pipe Bronze Brackets:

    RBP1050-12: 12' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $290.00

    RBP1050-6: 6' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $145.00

    RBPCON1050: 3/4" Brass Pipe Couplings are $7.70 each.  

    RBTEC1050: 3/4" Brass Pipe End Caps are $7.70 each. 

    Ludowici Spanish tiles come in two sizes: Spanish 13, and Spanish 18:

    Spanish 13: These tiles are 9 3/4"w X 13 1/4"h overall. They have an exposure of 8 1/4"w and 10 1/4"h. Install the brackets every four tiles to space them 33" apart. Install them every 5 tiles to space them 41 1/4" apart.

    Spanish 18: These tiles are 9 3/4"w X 18 3/8"h overall and will not fit this bracket. They have an exposure of 8 1/4"w X 15 3/8"h. 


    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $400.00
  • Fitrite 631 Aluminum French Tile Bracket

    Not rated yet

    SGFR631 Fitrite #631 3-pipe Aluminum Alloy Snow Fence Bracket for French Tile.

    Aluminum brackets require galvanized pipes. 3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings. This item is a special order item that requires a 6-8 week lead time. Since this product is made to order it is non-returnable and non-refundable. We will need a sample tile to make sure the brackets are the correct size. Space two to four feet apart horizontally depending on roof slope and snow load.

    ADDITIONAL ITEMS:

    GLP1050-10: 10' section of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets are $63.00.

    GPCON1050: 3/4" Galvanized Pipe Couplings are $5.00 each.

    GPEC1050: 3/4" Galvanized Pipe End Caps are $5.00 each.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $258.00
  • Fitrite 632 Bronze Bracket for French Tile

    Not rated yet

    Fitrite #632S 3-pipe bronze snow fence bracket for short French Tile.

    This item is a special order item that requires a 4-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on roof slope and snow load.

    Additional Items for Bronze Brackets:

    RBP1050-12: 12' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $290.00

    RBP1050-6: 6' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $145.00

    RBPCON1050: 3/4" I.D. Brass Pipe Couplings are $7.70 each.  

    RBTEC1050: 3/4" I.D. Brass Pipe End Caps are $7.70 each. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $400.00
  • Fitrite 832 Brackets for Designer Tile

    Not rated yet

    Mullane Fitrite 3-Pipe Brackets for Designer Tile

    Options: 

    #832 Bronze  $540.00

    #832S Short Bronze $380.00

    #831 Aluminum $297.00

    3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings. Aluminum brackets require galvanized pipes. Bronze brackets use brass pipes.

    This is a special order item that may require a 6-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on roof slope and snow load.

    ADDITIONAL ITEMS:

    GLP1050-10: 10' section of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets are $63.00.

    GPCON1050: 3/4" I.D. Galvanized Pipe Couplings are $5.00 each.

    GPEC1050: 3/4" I.D. Galvanized Pipe End Caps are $5.00 each.

    RBP1050-12: 12' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $290.00

    RBP1050-6: 6' section of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $145.00

    RBPCON1050: 3/4" I.D. Brass Pipe Couplings are $7.70 each.  

    RBTEC1050: 3/4" I.D. Brass Pipe End Caps are $7.70 each. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    • $297.00