Shingle Roofs

We sell snow guards for shingle roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet! 

  • Mullane 100S Snow Guards

    Mullane 100S standard nail application snow guards are designed to be installed on slate and asphalt shingle roofs by nail application during the installation of the roofing. All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. The shoe is cast bronze and the strap is 24-ounce cold-rolled copper.

    See side-by-side photos comparing the AS to the NA models. The NA is longer and sits higher on the roof with more space between the shoe and the strap for thicker shingles and slates (maximum 3/8" slate, tile, or shingle thickness). 

    The AS is shorter and the shoe is closer to the strap, which makes it more suitable for thinner roofing such as asphalt shingles. Check the CAD drawings below to make sure the dimensions work for your shingles.

    This is a traditional spike style snow guard from a design first patented in 1899. Model #100 is historically accurate for period restorations, but is just as appropriate for new construction or retrofit application on existing slate roofs. Because of its low profile, this model is more appropriate for residential usage. Model #100 is for applications on slate, shake, and shingle roofs, and is designed to fit between adjacent pieces of roof material so that only the casting is visible above the roof surface.


    $19.50 each.


    This snow guard is also available in a retrohook style for installation on existing slate roofs. The #100 snow guard has a smaller shoe than the #200, and is less expensive. View the #200.


    Options:

    100S-NA for Slate application

    100S-AS for Asphalt application

    We also have this style in retrofit (for existing roofs) and for flat copper roofs.

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $19.50
  • Mullane 200S Snow Guards

    The Mullane 200S snow guard is designed to be installed on slate or asphalt shingle roofs during the installation of the shingles. These snow guards fit BETWEEN the slates. Select the type below. 

    See side-by-side photos comparing the AS to the NA models. The NA is longer and sits higher on the roof with more space between the shoe and the strap for thicker shingles and slates (maximum 3/8" slate, tile, or shingle thickness). 

    The AS is shorter and the shoe is closer to the strap, which makes it more suitable for thinner roofing such as asphalt shingles. Check the CAD drawings below to make sure the dimensions work for your shingles.

    The Mullane #100 snow guard has a smaller shoe than the Mullane #200. The shoe is cast bronze and the strap is 24-ounce cold-rolled copper.

    This snow guard is fabricated from the same sheet metal components as the #100, but the #200 casting is 30% larger than the #100 (see photos). Both products are equally strong and effective in their capacity to hold snow on the roof, but the Model #200S is more appropriate for larger scale buildings, or where the roof material is thicker, such as tile roofing.

    All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. The castings are produced locally by old-world craftsmen using state of the art equipment to assure that each casting is of consistent quality. The final assembly is done by hand, using only solid copper rivets, so that each finished product is of uniform quality.

    Options:

    200S-NA for Slate application

    200S-AS for Asphalt application


    $20.00


    We also have this style for soldering to flat copper roofs: 100CPSM or 200CPSM.

    These are also available in a retrohook style for installation on existing slate roofs: 100-RH200-RH, and 300-RH.

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.
    0.0
    Add first review
    Not rated yet
    • $20.00
  • Berger #2 Snow Guards

    Berger Brothers Model #2 heavy duty snow guard is available in galvanized iron or bronze. 5" wide, 2 3/4" high. The riveted bar is 1/8" x 1" x 12" long and goes 8" under the slate or shingle. When installing, the underlying slate is notched to allow for the snow guard strap. 

    These snow guards are also suited for wood shake, tile, and mineral surfaced shingles. Excellent in areas that receive heavy snow! This snow guard is to be installed during the slate roof installation; it is not a retrofit model.

    Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

    Options:

    SGML-2: Galvanized Iron - $17.50

    SGBR-2: Bronze - $33.50


    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.
    0.0
    Add first review
    Not rated yet
    • $17.50
  • Berger #95 Snow Guards

    Berger Brothers Model #95 heavy duty ornamental snow guard is available in bronze, aluminum, or galvanized iron. This is a larger guard with Gothic styling designed to transfer snow and ice loads more effectively to reduce cracking of the slate.

    Options:

    SGML95: Galvanized Iron - $26.00

    SGAL95: Aluminum - $31.50

    SGBR95: Bronze - $43.50

    1/8" x 1" x 12" bar in appropriate metal combination. Excellent in areas that receive heavy snow! This snow guard is for new slate roof installation but can be installed on existing slate roofs too.

    Download instructions showing how to install on an existing slate roof.

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on snow guard orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $26.00
  • SGLLC1 Copper Loop Snow Guards

    The Berger Brothers SGLLC1 Copper Loop economy snow guard is perfect for wood deck applications on newly installed slate roofs, wood shakes, or asphalt shingles. 

    We also sell them in a case of 300 with free shipping. When large quantities of snow guards are needed on a tight budget, these will do the job.

    Available in copper only and made from heavy gauge solid copper wire. Minimum quantities required for proper installation: use 50 guards per square for a 4:12 slope roof, 75 guards per square for a 6:12 slope roof, and 150 guards per square for a 12:12 slope roof. These snow guards nail into place like a slate hook or nail.

    Snow guards should always be installed where the potential for sudden sliding of ice and snow will be hazardous to people or property below. Falling snow is a safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    0.0
    Add first review
    Not rated yet
    • $4.00
  • Salvo Copper Snow Guards

    Salvo copper snow guards for new slate roofs are made from 16 oz. solid copper, either 15" or 6" long. The fifteen-inch length allows the snow guards to be installed in a uniform pattern even on random-width slate roofs. On uniform width slate roofs, choose the six-inch version.

    If you want to install on an existing slate roof, use the Salvo 15-ES.

    This snow guard was designed in-house and was tested, not only by S&S, but also at the laboratories of Tox Pressotechnik in Warrenville, IL. This snow guard can be used on all roofing applications.

    There are also four style variations: Classic, Rabbit, Arch, and Fleur. The Rabbit, Arch, and Fleur require an additional charge due to the addition of a 24-ounce copper decorative attachment.

    Options:

    6" Classic: $12.50

    6" Rabbit: $15.50

    6" Arch: $15.50

    6" Fleur: $15.50

    15" Classic: $11.00

    15" Rabbit: $16.00

    15" Arch: $16.00

    15" Fleur: $16.00

    There are many different variations when it comes to installing snow guards on your roof. Basic installations on a slate roof is on the 3rd, 5th, and 7th horizontal course, approximately 24" apart in a W pattern.

    0.0
    Add first review
    Not rated yet
    • $11.00
  • Berger 100HP Snow Guards

    Berger 100HP Snow Guards are 9" long overall, and 4" wide, with a 1" wide strap. The angled shoe is 3" high and sits about 2.5" off the roof surface. These are good, economical, snow guards for new roof installations (not a retrofit model).

    Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

    We have added a few pictures of the Berger 100s beside Snow Birds, which are very similar. We recommend the Snow Bird to anyone looking for a Berger 100 alternative.

    Options:

    SGS100HP: Stainless Steel: $11.50

    SGC100HP: Copper: $17.00

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $11.50
  • Mullane 300S Snow Guards

    The Mullane 300S standard snow guard is available for new installations on slate roofs or asphalt shingle roofs. This is a solid bronze and copper pad style snow guard for all steep roof applications. The half round Model #300 casting is attached to a 20 oz. copper installation base flange by four brass rivets for extreme durability and snow load bearing capacity.

    Options:

    300S-NA for Slate Roofs: $20.00, 18" long, 2.56" wide, it protrudes up from the roof about 1.6"
     

    300S-AS for Asphalt Roofs: $19.00, 7.25" long, 2.56" wide, protrudes up from the roof about 1.6"

    Tested at 870 lbs. pressure. The solid bronze casting eliminates the corrosion problem caused by condensation which is formed inside closed, pressed copper snow guards. The installation flange can be easily fabricated to any length for any roof application and is also available with our Retro-Hook.
     

    The installation flange can be easily fabricated to any length for any roof application, typically 18" for new slate and 7.25" for shingle. For solder application on copper roofs, specify the Model #300CPSM.

    Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

    All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. The castings are produced locally by old-world craftsmen using state of the art equipment to assure that each casting is of consistent quality. The final assembly is done by hand, using only solid copper rivets, so that each finished product is of uniform quality.

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $20.00
  • Sieger 3-Pipe Rail Brackets

    Sieger 3-Pipe Snow Rail Brackets for roofs are available in bronze, aluminum, or galvanized iron. This is the heavy-duty pipe bracket only. This guard uses three 1/2" diameter pipes or solid bars, which are not included.

    5½" high, 3" wide at base, 14" long with strap, 3/16" x 1" strap. 

    BRACKETS SHOULD BE PLACED NO MORE THAN 3' APART FOR IRON OR BRONZE, AND 2' APART FOR ALUMINUM 

    Buy heavy-duty "Type K" copper pipe through your plumbing supply outlets in 10' or 20' lengths, or use solid 1/2" copper or brass rods. Copper pipes should be soldered together with couplings using a plumber's torch, wire solder, and paste or liquid flux. For aluminum brackets, use stainless steel pipe.   

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).  


    Bracket Options:

    Aluminum - $21.00

    Galvanized Iron - $31.50

    Bronze - $56.00

    You may need an adhesive/sealant if attaching to a metal roof.

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $21.00
  • Sieger Boss Spike Snow Guards

    Sieger Boss Spike Snow Guards are a attractive snow guards that are self-nailing, and popular due to the ease of installation and the durable construction. 2.5" X 2.5" face, 8" long, 3/16" square self-nailing strap.

    Worry no more about ice and snow sliding off your roof and injuring passersby, ruining precious shrubbery or damaging rain gutters. Recognized by contractors and roofers as the strongest, safest protection against snow and ice damage, sturdy Sieger Snow Guards have prevented ice and snow slides on America's homes since 1906.

    Minimum of 10 pieces per order. Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).

    Options:

    Boss 1 Bronze - $14.50
    Boss 2 Galvanized - $7.00

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $7.00
  • Sieger Model C Snow Guards

    #1 BESTSELLER!

    Sieger Model C Snow Guards are available in bronze, aluminum, or galvanized iron (select below).

    Classic, heavy-duty, high-quality snow guard at a great price! 3¼" high, 5½" wide, 9½" long, 3/16" x 7/8" strap. The strap on the aluminum model is 6063 aluminum. On the bronze model it's copper, and on the galvanized it's zinc-plated steel.

    Worry no more about ice and snow sliding off your roof and injuring passersby, ruining precious shrubbery or damaging rain gutters. Recognized by contractors and roofers as the strongest, safest protection against snow and ice damage, sturdy Sieger snow guards have prevented ice and snow slides on America's homes since 1906.

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).


    Options:

    Aluminum
    Galvanized Iron
    Bronze

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $9.00
  • Sieger Eagle Strap Snow Guards

    Sieger Eagle Strap Snow Guards are available in Cast Bronze or Cast Aluminum. Super heavy-duty, elegant, and classy, this snow guard will last forever and add character to any roof.

    4 5/8" high, 5 3/4" wide, 9.5" long with 3/16" x 7/8" strap. The strap on the aluminum model is 6063 aluminum. On the bronze model it's copper.

    Copper and bronze weigh 28.7 oz. each, aluminum weighs 8.9 oz. 

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).

    Worry no more about ice and snow sliding off your roof and injuring passersby, ruining precious shrubbery or damaging rain gutters. Recognized by contractors and roofers as the strongest, safest protection against snow and ice damage, sturdy Sieger Snow Guards have prevented ice and snow slides on America's homes since 1906. 

    Options:

    Aluminum - $12.00
    Bronze - $34.50

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.


    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code. 

    5.0
    Score: 5.0 (votes: 2)
    Reviews: 2
    • $12.00
  • Vermont Model L Snow Guards

    Vermont Snow Guard Company Model L Snow Guards in Cast Aluminum or Bronze.

    10 3/8" long, 5" wide, 3" high. Nail or screw application for new roofs.

    Options:

    Cast Aluminum - $16.00
    Bronze - $24.50

    Vermont Snow Guard Company's background as slate roofing specialists helped create a heavy-duty bronze snow guard that is not only practical, but aesthetically pleasing as well. The strap is stainless steel.

    This is a larger version of the Model S Snowguards.

    Download instructions showing how to install on an existing slate roof.

    0.0
    Add first review
    Not rated yet
    • $16.00
  • Vermont Model S Snow Guards

    Vermont Model S Snow Guards in Cast Bronze or Cast Aluminum snow guards are designed to be a better alternative to traditional snow retention systems. 

    10.25" long, 3.5", 1.75" high. Nail or screw application for new slate roofs.

    Vermont Snow Guard Company's background as slate roofing specialists helped create a heavy-duty bronze snow guard that is not only practical, but aesthetically pleasing as well. The strap is solid hardened copper.

    Options:

    Cast Aluminum - $13.00
    Cast Bronze - $20.50

    This is a smaller version of the Model L Snowguard. The Model S has a copper strap while the Model L has a stainless steel strap.

    Download instructions showing how to install on an existing slate roof.

    0.0
    Add first review
    Not rated yet
    • $13.00
  • Jalco Eagle Strap Snow Guards

    Jalco Eagle Strap Snow Guards are available in aluminum, or powder coated aluminum, for slate and asphalt shingle roofs. Aluminum straps have with three mounting holes. 9.5" long overall, 5 5/8" wing span width, 4.5" high.

    Aluminum snow guards can be powder coated in almost any color.. See color chart below or view online (polyester). 

    Jalco Snow Guards are designed to prevent snow slides. After years of installing slate roofs with steel snow guards - resulting in rust trails going down the roofs, John Kleckner designed aluminum snow guards to eliminate this unsightly problem. In 1958 he came out with what was arguably the first aluminum snow guard. Jalco aluminum snow guard castings are made with at least 50% recycled aluminum.

    Two week lead time for powder coated Jalco snow guards. 

    Jalco aluminum mill finish products almost always ship within 24 hours, if not same day.  


    Options:

    Aluminum Mill Finish
    Aluminum Painted

    Download instructions showing how to install on an existing slate roof.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $8.00
  • Jalco Classic Strap Snow Guards

    Jalco Classic Strap Snow Guards are equipped with a heavy aluminum strap (aluminum models) or a copper strap (bronze models) with three mounting holes. 9.5" long overall, 5 3/4" width, 2 3/4" high, for slate or shingle roofs. 

    Jalco aluminum snow guards can be powder coated in almost any color upon request, as indicated below. See color chart below or view online.

    Two week lead time for powder coated Jalco snow guards. Two to three week lead time for bronze snow guards.

    Jalco aluminum mill finish products almost always ship within 24 hours, if not same day.  


    Options:

    Aluminum Mill Finish
    Aluminum Powder Coated
    Bronze

    Download instructions showing how to install on an existing slate roof.

    0.0
    Add first review
    Not rated yet
    • $7.50
  • Jalco TR-Eagle Strap Snow Guards

    Jalco TR-Eagle Strap Aluminum Snow Guards, for slate roofs and asphalt shingle roofs. Heavy aluminum strap with three mounting holes. 9.5" long overall, 4 3/4" wing span width, 4.5" high, 9.8 oz.

    This is a solid snow guard with a full Eagle figure on both the front and the back of the snow guard (not hollow on the back side).

    Jalco aluminum snow guards can be powder coated in almost any color upon request. See color chart below or view online (polyester).

    Two week lead time for powder coated Jalco snow guards. Two to three week lead time for bronze snow guards.

    Jalco aluminum mill finish products almost always ship within 24 hours, if not same day.  


    Options:

    Mill Finish Aluminum - $8.50
    Powder Coated Aluminum - $14.50

    Download instructions showing how to install on an existing slate roof.

    0.0
    Add first review
    Not rated yet
    • $8.50
  • Fitrite 124 2-Pipe Snow Rail Brackets

    Mullane Fitrite #124 2-Pipe Bronze or Galvanized Snow Rail Bracket for asphalt shingle roofs. 

    The FR124 Mini Protector Snow Fence Bracket is available in malleable galvanized iron or cast bronze mounted on a brass plate. The castings are mounted on a 2" x 12" plate with pre-drilled holes for easy installation. The bracket assembly is set up to accommodate two 1/2" I.D. pipes (use galvanized pipes with the iron bracket and brass with the bronze bracket). Brackets are adjustable to the roof pitch. The FR124 should be used only where low to moderate snow loads are anticipated and can be mounted to most any roof surface. 

    If you want a 2-pipe snow rail bracket for slate roofs, use the Galvanized FR121  or the Bronze FR122. The brackets are sized the same as the slate size.  

    1/2" I.D. red brass pipe or 1/2" galvanized pipe, couplings, and end caps are sold separately.


    OPTIONS:

    FR124ML: Galvanized is $96.00

    FR124BRZ: Bronze is $183.00

    ADDITIONAL ITEMS:

    GLP800-10: 10' sections of 1/2" I.D. Galvanized Pipe for 2-pipe brackets are $66.00

    GPCON800: 1/2" Galvanized Pipe Couplings are $5.00 each

    GPEC800: 1/2" Galvanized Pipe End Caps are $5.00 each 


    RBP800-12: Berger 1/2" I.D. Brass Pipe 12' Lengths are $297.00 each

    RBPCON800: Berger 1/2" Brass Pipe Coupling are $7.00 each

    RBTEC800: Berger 1/2" Brass Pipe End Caps are $7.00 each


    This special order item requires a lead time. Call us at (814) 786-9085 to inquire about what the lead time currently is. It is non-returnable and non-refundable. 

    Snow rails are used along the perimeter of slate roofs for the prevention of sudden and unexpected ice and snow avalanches, which can damage people, cars, shrubbery, lower roofs, and other property underneath. The rail system can also include stainless steel expanded metal to prevent slates and other debris from sliding under the rails and creating a hazard. Also, a standard field array of snow guards can be included on the field of the roof above the snow rail for maximum protection.

    Snow rail fence brackets are installed parallel to and approximately 24-36 inches above the eaves. The brackets should be spaced from 18-24 inches to no more than 42-48 inches apart horizontally, depending on the pitch of the roof and the expected snow load. It is recommended to use through bolts with a backer plate on the underside of the roof deck. Bronze, brass, or stainless steel pipe is recommended. Copper water pipes should not be used with Mullane snow rails, although they are used with Sieger snow rail brackets, both for 
    slate roofs and for standing seam roofs

    High snow load areas should use a three-pipe system such as the Mullane 500, the Mullane Fitrite 131 ML, or the Mullane Fitrite 132 BR,  If a smaller system is used, then it should be supplemented with an additional snow guard array in the field of the roof above the snow rail.


    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee.   

    We offer free shipping on orders of sufficient quantity. 

    For more information, call us at (814) 786-9085, or send us an email, and include the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $96.00
  • Alpine PD10 Copper Snow Guards

    Alpine PD10 Copper Snow Guards: Pad area: 2 3/8" L x 2 3/8" W (at widest point) x 1 7/16" H; Strap length: 15 5/8"

    Our riveted "fish head" design means optimum strength with no risk of unfolding. Thin, yet durable strap minimizes disruption of slate/shingle pattern while allowing secure mechanical attachment to the structural deck. Allows snow and ice to drop off in small amounts or melt completely. Protects against snow damage at the lower roof level (gutters, valleys, crickets, roof protrusions, plumbing vents, etc...) and at ground level (cars, people, landscaping, pets, walkways, ground mounted mechanical units).

    Applicable roof types: New Slate, New Synthetic Shingles, New Composition Shingle, New Cedar Shake, New Flat Tile, New Spanish Tile, Existing Spanish Tile.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $12.50
  • Fusion Guard Snow Guard

    Alpine Fusion Guard Hybrid Snow Guard

    Available in stainless steel, or red brass, as well as powder-coated aluminum, and cold-rolled powder-coated steel. 

    10 7/8" "reach" to nail. More about retrofit snow guard "reach."

    The strap is 18" long, but also available in multiple lengths to accommodate various roofing materials as well as retrofit applications. It is a retrofit style snow guard (they can be installed on existing roofs), or they can be installed on new roofs. See supporting documents below for measurements and installation instructions. Stiffening ribs on the front of the snow guard add rigidity and strength.

    Ideal for residential customers who don't want the look of a pipe-style system on their roof, but want to be able to add horizontal rods to their snow guards should they be needed. Protects against snow damage to gutters, valleys, crickets, roof protrusions, plumbing vents, cars, people, landscaping, pets, walkways, ground-mounted mechanical units, and so on.

    Rods and rod clamps are optional and are sold separately. 

    RD77-SS: 6' long, 3/8" stainless rods are $25.00 +shipping 
    RD77-BR: 6' long, 3/8" brass rods are $46.00 +shipping
    RD87-SS: Stainless couplings are $6.00
    RD87-BR: Brass couplings are $7.50
    RD65-AL: Powder-coated aluminum end collars are $7.85 
    RD65-SS: Stainless end collars are $7.99

    OPTIONS:

    Cold Rolled Steel pre-painted dark bronze (Fusion-Guard-Gray)

    Aluminum Powder Coated Dark Bronze (Fusion-Guard-AL-STB)

    Aluminum Powder Coated Graphite Gray (Fusion-Guard-AL-GRAY)

    See the color chart for color options (custom colors are available).

    0.0
    Add first review
    Not rated yet
    • $7.00
  • Snow Bird Hybrid Snow Guards

    This is a retrofit snow guard that can be used on new roofs or existing roofs. Available in Brass, or Galvanized Steel (Mill Finish or Powder Coated Dark Bronze). 

    13" maximum "reach " to nail. More about retrofit snow guard "reach."

    The Snow Bird Hybrid Snow Guard allows you to add optional 3/8" solid horizontal rods during or after the install. Stiffening ribs on the front of the pad add rigidity and strength while allowing the rods to sit static. The strap is 18" long, but also available in multiple lengths to accommodate various roofing materials as well as retrofit applications. It is ideal for residential customers who don't want the look of a pipe-style system on their roof, but want the benefits a pipe-style system provides. It protects against snow damage to gutters, valleys, crickets, roof protrusions, plumbing vents, cars, people, landscaping, pets, walkways, ground mounted mechanical units. 
     
     

    See supporting documents below for measurements and installation instructions. 

    Roof types: New Slate, Existing Slate, New Synthetic Shingles or Shakes, Existing Synthetic Slate or Shake, New Composition Shingle, Existing Composition Shingle, New Cedar Shingle, Existing Cedar Shingle, New Flat Tile, Existing Flat Tile, New French Tile, Existing French Tile, New Spanish Tile, Existing Spanish Tile, New Rounded Tile, Existing Rounded Tile.
     

    Rods and rod clamps are optional and are sold separately: 
     

    RD77-SS: 6' 3/8" stainless rods are $25.00 +shipping 
    RD77-BR: Six-foot 3/8" brass rods are $46.00 +shipping  
    RD87-SS: Stainless couplings are $6.00
    RD87-BR: Brass couplings are $7.50
    RD65-AL: Powder-coated aluminum end collars are $7.85 
    RD65-SS: Stainless end collars are $7.99

    SNOW BIRD OPTIONS:

    Brass (Snow-Bird-BR): $22.50

    Copper Coated Stainless Steel (Snow-Bird-SSCU) $22.50

    Galvanized Steel Mill Finish (Snow-Bird-GAL): $9.50

    Galvanized Steel Powder Coated Dark Bronze (Snow-Bird-GAL-STB): $12.00     

    Galvanized Steel Powder Coated Your Color Choice: See the color chart below for special order powder coating colors. State the color in the customer comments section at checkout. This requires an 2-3-week lead time.

    NOTE: Returned Alpine snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project.           

    0.0
    Add first review
    Not rated yet
    • $9.50
  • GM Gothic Snow Guards

    Green Mountain Gothic heavy duty ornamental snow guard is available in aluminum or galvanized iron. This is a larger guard with Gothic styling designed to transfer snow and ice loads more effectively to reduce cracking of the slate.

    Options:

    A1 GM95GS: Galvanized Iron - $20.00

    A2 GM95AL: Aluminum - $22.00

    1/8" x 1" x 12" bar in appropriate metal combination. Excellent in areas that receive heavy snows! This snow guard is for new slate roof installation, but can be installed on existing slate roofs too.

    Download instructions showing how to install on an existing slate roof.

    NOTE: Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on snow guard orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $20.00
    Sorry, we only have 1330 of that item available
  • Green Mt. C2 Copper Snow Guards


    Green Mountain C2 Copper Snow Guards

    Nail application solid copper snow guard. LIMITED QUANTITIES!

    Alternatives (unlimited): Alpine PD10 Copper Snow Guards and Salvo Copper Snow Guards

    Pad area: 2 3/8" L x 2 3/8" W (at widest point) x 1 7/16" H; Strap length: 15 5/8"

    Applicable roof types: New Slate, New Synthetic Shingles, New Composition Shingle, New Cedar Shake, New Flat Tile, New Spanish Tile, Existing Spanish Tile.

    $10.00 each. 

    Also available as a retrofit snow guard (Green Mountain C1).

    0.0
    Add first review
    Not rated yet
    • $10.00
    Sorry, we only have 98 of that item available
    • Free shipping

    Case of SGLLC1 Copper Loop Snow Guards


    FREE SHIPPING on box of 300! (Alaska and Hawaii excluded.)

    The Berger Brothers SGLLC1 Copper Loop-the-Loop economy snow guard is perfect for wood deck applications on newly installed slate roofs, wood shakes, or asphalt shingles.

    Order a case of 300 for $999.00 with free shipping. When large quantities of snow guards are needed on a tight budget, these will do the job. 

    We also sell them by the piece. 

    Available in copper only: made from heavy gauge solid copper wire. Minimum quantities required for proper installation: use 50 guards per square for a 4:12 slope roof, 75 guards per square for a 6:12 slope roof, and 150 guards per square for a 12:12 slope roof. These snow guards nail into place like a slate hook or nail. 

    Snow guards should always be installed where the potential for sudden sliding of ice and snow will be hazardous to people or property below. Falling snow is a safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $999.00

Footer navigation