Flat Metal Roofs

We sell snow guards for flat metal roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet! 

Although we sell Surebond 190 adhesive sealant for attaching snow guards to flat roofs, it cannot be used in cold weather. However, Liquid Nails has a selection of construction adhesives that will adhere in freezing conditions, such as LIQUID NAILS®Extreme Heavy Duty Construction Adhesive (LN-907), or LIQUID NAILS® FUZE*IT® MAX All Surface Construction Adhesive (LN-3000). These adhesives have been tested for cold and certified by an independent third-party testing laboratory. 

  • Green Mountain B3

    Green Mountain B3 Snow Guards are available in copper. This snow guard can be mechanically fastened, soldered (to copper roofing), or can be mechanically mounted onto corrugated roof panels.  


    Green Mountain snow guards normally ship out within 24 hours.  

    These snow guards provide affordable protection for your gutter, foundation, shrubbery, automobiles, or pedestrians. They are ideal for mounting on corrugated or flat roof panels and will last forever. Mechanically fasten using stainless steel gasketed screws and an adhesive. 

    They have 8.75-square-inches of snow-stopping area and a 1" X 2" flat mounting area. Four-inch-wide face, two-inch-long base, sits 2 3/4" up from the roof. Two mounting holes.



    Options:

    SG-B3 Copper: $4.00

    NOTE: Returned Green Mountain snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.  

    We offer free shipping on orders over $1,000.00. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $4.00
    Sorry, we only have 15 of that item available
  • Berger Blizzard 200 Snow Guards

    Berger Blizzard 200 snow guards for flat roofs are available in solid copper or 18-gauge type 304 stainless steel. These come with 3M 300LSE self-adhesive EPDM bottom sealing gaskets (not pre-installed). Use gasketed stainless steel screws. No adhesive or sealant is needed. Screws are not included.

    The face of the snow guard is 4 3/8" wide, the base is 2" long and 1" wide, and the snow guard sits 2.5" high off the roof. Made to look like the Berger RT  and the Berger AP  standing seam snow guards.


    Options:

    SGSS20Mill finish stainless steel: $4.00

    SGCP200 Copper: $9.50

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $4.00
  • PD30 Copper Snow Guards

    Alpine PD30 Copper Snow Guards For soldering to copper roofing.

    Pad area: 2 3/8" L x 2 3/8" W (at widest point) x 1 7/16" H

    Strap length: 3 7/16"

    Our riveted "fish head" design means optimum strength with no risk of unfolding. Ideal size for soldering to copper or zinc panels, or adhered to metal panels. Allows snow and ice to drop off in small amounts or melt completely. Protects against snow damage at gutters, valleys, crickets, roof protrusions, plumbing vents, and at ground level cars, people, landscaping, pets, walkways, ground mounted mechanical units.

    Price: $8.00

    NOTE: Returned Alpine snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project. 

    0.0
    Add first review
    Not rated yet
    • $8.00
  • Sieger 3-Pipe Rail Brackets

    Sieger 3-Pipe Snow Rail Brackets for roofs are available in bronze, aluminum, or galvanized iron. This is the heavy-duty pipe bracket only. This guard uses three 1/2" diameter pipes or solid bars, which are not included.

    5½" high, 3" wide at base, 14" long with strap, 3/16" x 1" strap. 

    BRACKETS SHOULD BE PLACED NO MORE THAN 3' APART FOR IRON OR BRONZE, AND 2' APART FOR ALUMINUM 

    Buy heavy-duty "Type K" copper pipe through your plumbing supply outlets in 10' or 20' lengths, or use solid 1/2" copper or brass rods. Copper pipes should be soldered together with couplings using a plumber's torch, wire solder, and paste or liquid flux. For aluminum brackets, use stainless steel pipe.   

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).  


    Bracket Options:

    Aluminum - $21.00

    Galvanized Iron - $31.50

    Bronze - $56.00

    You may need an adhesive/sealant if attaching to a metal roof.

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $21.00
  • Sieger MC2 Snow Guards

    Sieger MC2 Cast Aluminum or Bronze Snow Guards are heavy-duty, classic cast snow guards for mechanically fastening to a flat metal roof. If mechanically fastening, also use an adhesive. 

    5" long, 5 1/2" wide, 3" high. Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).

    We also have this in a narrower style of aluminum (MC2N). 

    Options:

    MC2A Aluminum - $8.00

    MC2B Bronze - $24.50

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $8.00
  • Sieger MC2AN Snow Guards

    Sieger MC2AN Cast Aluminum Snow Guards are for flat metal roofs. Attach with mechanical fasteners and an adhesive. We also have this in a wider style of aluminum (MC2A).

    5" long, 5 3/8" wide, 3" high, 5.8 oz. Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).


    MC2AN Aluminum - $8.00


    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.


    0.0
    Add first review
    Not rated yet
    • $8.00
  • Sieger Eagle 2 Snow Guards

    Sieger Eagle 2 Snow Guards are for flat metal roofs, and are available in aluminum or bronze (select below). Attach to the roof with solder (on copper roofs), or caulk/adhesive, and mechanical fasteners. If mechanically fastening, also use an adhesive.

    4 3/4" long, 4 1/2" wide, 3 3/4" high. Sieger products almost always ship within 24 hours, if not the same day (custom paint requires a longer lead time).  


    Options:

    Aluminum - $8.50

    Bronze - $20.00

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
     
    send us an email and include the item, quantity, and shipping zip code.

    5.0
    Score: 5.0 (votes: 2)
    Reviews: 2
    • $8.50
    Sorry, we only have 906 of that item available
  • Jalco Eagle Snow Guards for Flat Roofs

    Available in aluminum, or powder coated aluminum.

    These are screw type snow guards for flat roofs. Two mounting holes. 2 5/8" long base, 5 1/2" wing span width, 4" high. Comes with two fasteners per snow guard.

    Jalco aluminum snow guards can be powder coated in almost any color upon request. 

    See color chart below or view online (polyester). 

    Two week lead time for powder coated Jalco snow guards.

    Jalco aluminum mill finish products almost always ship within 24 hours, if not same day.  


    Options:

    Aluminum Mill Finish - $6.50
    Aluminum Powder Coated - $13.00

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $6.50
  • Sieger Boss 3 Snow Guards

    Sieger Boss 3 Snow Guards for metal roofs.

    Options:

    Aluminum Boss 3A - $4.50

    Bronze Boss 3B - $11.00

    A heavy-duty cast snow guard for flat metal roofs. Attach to roof using caulk/adhesive and mechanical fasteners. 4 5/8" long, 2 3/8" wide, 2 3/8" high.

    Sieger products almost always ship within 24 hours, if not same day (custom paint requires a longer lead time).

    NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.

    Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting. They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait. Call us at 814-786-9085, or send us an email to get painted Sieger snow guards.



    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.


    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $11.00
  • Mullane 640 Snow Boss Snow Guards

    The Mullane Snow Boss is a traditionally shaped, cast aluminum snow guard for the mid-panel application on all standing, batten, and flat seam, non-copper metal roofs. Typical attachment is by high-strength adhesive, and/or mechanical fasteners. 

    Options:

    640M:($15.00) Mill Finished Cast Aluminum - "Mill Finish" is the natural appearance of aluminum as it comes from the rolling mill or the extrusion mill. It appears "as is" with no external mechanical or chemical finishing.

    640E: ($18.00) Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase.

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $15.00
  • Mullane 100CPSM Snow Guards

    The Mullane 100CPSM Copper/Bronze Snow Guard is for soldering to flat copper or stainless steel roofs. This is a traditional spike style snow guard first patented in 1899. It is historically accurate for period restorations and appropriate for new construction, being primarily suited for residential usage. The shoe is cast bronze and the strap is 24-ounce cold-rolled copper.

    If you need soldering supplies, visit our Solder Warehouse.  

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $14.30
  • Mullane 200CPSM Snow Guards

    The Mullane 200CPSM Snow Guard is for soldering to flat copper or stainless steel roofs. This is a traditional copper/bronze spike-style snow guard first patented in 1899. It is historically accurate for period restorations and appropriate for new construction, being primarily suited for residential usage. The #200 casting is 30 percent larger than the #100 and is more appropriate for larger buildings and where the roof shingles are thicker, such as on tile roofs. The shoe is cast bronze and the strap is 24-ounce cold-rolled copper.  

    If you need soldering supplies, visit our Solder Warehouse.

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.


    0.0
    Add first review
    Not rated yet
    • $15.00
  • Mullane 300CPSM Snow Guards

    The Mullane 300CPSM snow guard is a solid copper and bronze snow guard for all flat roof applications but is especially suited for soldering to copper roofs. The bronze shoe is riveted to a 24-ounce copper base flange for extreme durability and snow load-bearing capacity.

    5.25" long, 2.56" wide, 1.58" high. 


    $19.00 each


    If you need soldering supplies, visit our Solder Warehouse.  

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $19.00
  • Mullane 630M Snow Boss Snow Guards

    The Mullane 630 Snow Boss, manufactured by Berger, is a solid mill-finishcast-aluminum snow guard best used for curtain wall systems, window wells, or cornice shelves.   

    Typical installation is by means of high-strength adhesives such as SB-190, that develop superior bonding strength on modern metal roofs coated with plastic resin paints such as Kynar®. 

    Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger. May also be mechanically attached by drilling holes in the snow guard and using stainless steel screws.

    630M $15.00

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $15.00
  • Mullane 690M Snow Boss Snow Guards

    The Mullane 690M Snow Boss Snow Guards are decorative, spoked, half-round, solid cast, mill-finish aluminum snow guards attached with a high-strength adhesive, for the mid-panel application on all standing, batten, and flat seam, non-copper metal roofs. You can spray paint them to suit your desires, as shown in the photo.
     

    You can also mechanically attach these snow guards with stainless steel screws, but you have to drill pilot holes in them first (and still use an adhesive).


    690M $26.00

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.

    0.0
    Add first review
    Not rated yet
    • $26.00
  • Mullane 650C Snow Boss Snow Guards

    The Mullane 650 Snow Boss Snow Guards for metal roof systems are constructed with durable, UV-resistant polycarbonate. Can be mechanically fastened or adhesive mounted.

    The Berger 650 includes a new patent-pending base design and the latest technological advance in adhesive-mounted snow guard systems. The cross-hatch design strengthens adhesive grip by increasing surface area and texture, providing for faster solvent escape and adhesive curing. A series of evenly spaced holes in the base allows the solvents to dissipate quickly and become "glue rivets." 

    650C $5.50

    NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders over $1,000.00.

     
     
    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $5.50
  • Berger SM Aluminum Snow Guards

    Berger SM aluminum snow guards for flat metal roofs are available in a mill finish or primed with an epoxy primer.

    5" wide shoe, 4" long, 2 1/4" wide mounting bracket; stands 2 1/8" up from the roof. 

    Mechanically mount using stainless-steel gasketed screws, seal, and fortify with an adhesive.

    Options:

    SMMFSG 
    Mill Finish: $19.00
     

    SMEASG 
    Epoxy Primer: $23.00
     

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $19.00
  • Berger 100 Shoe Snow Guards

    Berger 100 Shoe Snow Guards are available in copper or stainless steel. The copper version can be mechanically fastened, or soldered (to copper roofing), or can be mechanically mounted onto corrugated roof panels.  
     
     
     
     
     
     
    These snow guards provide affordable protection for your gutter, foundation, shrubbery, automobiles, or pedestrians. They are ideal for mounting on corrugated or flat roof panels and will last forever. Mechanically fasten using stainless steel gasketed screws and an adhesive.
     

    They have 8.75-square-inches of snow-stopping area and a 1" X 2" flat mounting area. Four-inch-wide face, two-inch-long base, sits 2 3/4" up from the roof. Two mounting holes.  

    Options:

    SG-CPS Copper: $6.00
     
    SG-SSS Stainless Steel: $5.50
     
       
    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.  

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

     









    0.0
    Add first review
    Not rated yet
    • $5.50
  • Berger RTMINI Snow Guards

    Berger RTMINI Clear Polycarbonate snow guards are for flat metal roofs and are made with UV stabilizers. This is a completely CLEAR plastic snow guard measuring 1 1/2" wide, 6" long, 2 1/2" high, and 1/4" thick. Can be mounted with an adhesive and/or with mechanical fasteners. Each snow guard weighs about 2.2 oz.
     

    Berger  RTMINI clear snow guards provide strength and longevity. They have low visibility and blend with roof materials. The RTMINI has a 1 1/2" wide base to fit parapet ribbed roof channels. They are manufactured with a 4 1/2-square-inch holding area, a  2:1 base-to-blade ratio, and a gusseted blade snow pocket that combine to effectively retain snow. They can be attached with adhesives screws, or VHB tapes. The RTMINI features a blade "Snowflake" slot that accepts a metal color chip or custom emblem. [Adhesive failure does not constitute a Berger product defect and is not the responsibility of Berger.]

    Price: $2.00

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

    0.0
    Add first review
    Not rated yet
    • $2.00
  • Berger Clear Polycarbonate Snow Guards

    Berger Clear Polycarbonate Snow Guards are for flat metal roofs. This is a completely clear plastic snow guard made of polycarbonate with UV stabilizers. It measures 3 1/2" wide, 6" long and 2 1/2" high. Each weighs about 4.1 oz. 

    Options:

    RTCLSR - $5.50, Structural Ribs: has starter dimples to designate screw position and can be mounted with an adhesive alone, and/or with mechanical fasteners.   


    RTCLSM - $5.50, Surface Mount: has pre-drilled holes to accommodate #10 "Type A" self-tapping fasteners. 

    The unique vent rib system allows for adhesive out-gassing, which increases the shear and mechanical strength. The three-to-one base-to-blade ratio adds significantly to the peel adhesion of the device to the surface. Superior engineering, along with the structural ribs, prevents common blade breakage.  Berger Clear Snow Guards are also well suited for mechanical attachments and can be attached to any panel having a flat surface of as little as 3 1/2" wide. [Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger.]

    NOTE: Returned Berger snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project.

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $5.95
  • Berger #20 Snow Guards

    Berger #20 snow guard for flat roofs is available in bronze or galvanized malleable iron. Use stainless steel screws and a high strength adhesive. The face of the snow guard is 5" wide, the base is 3" long and the snow guard sits 2.5" high off the roof.


    Options:

    SGML20 Iron: $13.00

    SGBR20 Bronze: $21.00

    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project. 

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $14.00
  • Jalco Standard Snow Guards for Flat Roofs

    Available in aluminum, powder coated aluminum, or bronze. Two mounting holes. 2" long base by 2 1/4" wide, 5 5/8" total width, 2 1/2" high. Comes with two 1 5/8" fasteners per snow guard.

    Jalco aluminum snow guards can be powder coated in almost any color. See color chart below.

    Two week lead time for powder coated Jalco snow guards. Two to three week lead time for bronze snow guards.

    Jalco aluminum mill finish products almost always ship within 24 hours, if not same day.  


    Options:

    Aluminum Mill Finish - $6.50
    Bronze - $31.50
    Aluminum Powder Coated - $12.50

    5.0
    Score: 5.0 (votes: 1)
    Reviews: 1
    • $6.50
    • Free shipping

    Case (12 Tubes) Surebond 190 Caulk


    Free shipping in the continental USA (Alaska and Hawaii not included). 

    CASE OF 12 TUBES: SB-190 Surebond Everseal High Strength Construction Adhesive Caulk is a versatile, hard setting, one part adhesive designed for a wide variety of industrial uses. This is the case price (12 tubes, 10.3 oz. each) $215.50.

    The unique formula possesses up to 2,000 lbs. of tensile strength. The SB-190 is a field proven sealant adhesive. Please follow directions for best results. 

    It requires 28 consecutive days (672 consecutive hours) with temperatures of 50 degrees Fahrenheit or greater to cure properly. 

    Under certain conditions, temporary measures may need to be employed to hold the snow guard in place until the initial set of the adhesive has taken place. It is available by the case of 12 tubes. 

    One tube will adhere 8-10 CL Snow Guards and 14-16 RTMINI Guards

    Berger does not warrant adhesive failure. The adhesives are offered for the convenience of the user who assumes full responsibility for its use. These adhesives are used throughout the industry for adhering snow guards with successful results utilizing the directions of the adhesive manufacturer. It is recommended for use only when weather conditions permit proper curing per manufacturer's instructions. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger.

    0.0
    Add first review
    Not rated yet
    • $225.00
    • Free shipping

    Stainless Gasketed Screws #S07C162XOM


    Free Shipping (Alaska and Hawaii not included).

    Stainless Low-Profile Gasketed Screws #S07C162XOM.

    1000 count, 1 5/8". Washered stainless screws are hard to find. We can't guarantee these will be in stock. Inventory is low, but once stock is depleted, we will disable them from the store.

    Stainless steel screws for fastening snow guards mechanically to underlying roof decks. Stainless steel screws are compatible with all metals, including copper, aluminum, and steel. Major thread diameter is approximately 5/32".

    These screws have #1 square head slots. Type 305 stainless steel is a chromium nickel stainless steel that has an increased nickel content with excellent corrosion resistance.

    Perfect when used with Surebond SB-190 High Strength Adhesive Caulk, or other high-strength construction sealant/adhesive.

    Allow 2-3 weeks for delivery. Made in Taiwan.

    0.0
    Add first review
    Not rated yet
    • $275.00

Footer navigation