Flat Metal Roofs
We sell snow guards for flat metal roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet!
Although we sell Surebond 190 adhesive sealant for attaching snow guards to flat roofs, it cannot be used in cold weather. However, Liquid Nails has a selection of construction adhesives that will adhere in freezing conditions, such as LIQUID NAILS® Extreme Heavy Duty Construction Adhesive (LN-907), or LIQUID NAILS® FUZE*IT® MAX All Surface Construction Adhesive (LN-3000). These adhesives have been tested for cold and certified by an independent third-party testing laboratory.
-
Green Mountain B3
Green Mountain B3 Snow Guards are available in copper. This copper snow guard can be mechanically fastened, or soldered (to copper roofing), or can be mechanically mounted onto corrugated roof panels.Green Mountain snow guards normally ship out within 24 hours.
These snow guards provide affordable protection for your gutter, foundation, shrubbery, automobiles or pedestrians. They are ideal for mounting on corrugated or flat roof panels, and will last forever. Mechanically fasten using stainless steel gasketed screws and an adhesive.They have 8.75-square-inches of snow stopping area and a 1" X 2" flat mounting area. Four-inch-wide face, two-inch-long base, sits 2 3/4" up from the roof. Two mounting holes.Options:
SG-B3 Copper: $4.50NOTE: Returned Green Mountain snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders over $1,000.00. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
Berger Blizzard 200 Snow Guards
Berger Blizzard 200 snow guards for flat roofs are available in solid copper or 18-gauge type 304 stainless steel. These come with 3M 300LSE self-adhesive EPDM bottom sealing gaskets (not pre-installed). Use gasketed stainless steel screws . No adhesive or sealant is needed. Screws are not included.The face of the snow guard is 4 3/8" wide, the base is 2" long and 1" wide, and the snow guard sits 2.5" high off the roof. Made to look like the Berger RT and the Berger AP standing seam snow guards.
Options:
SGSS200 Mill finish stainless steel: $4.00SGCP200 Copper: $9.00
NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
PD30 Copper Snow Guards
Alpine PD30 Copper Snow Guards
Pad area: 2 3/8" L x 2 3/8" W (at widest point) x 1 7/16" H
Strap length: 3 7/16"
For soldering to copper roofing. Our riveted "fish head" design means optimum strength with no risk of unfolding. Ideal size for soldering to copper or zinc panels, or adhered to metal panels. Allows snow and ice to drop off in small amounts or melt completely. Protects against snow damage at gutters, valleys, crickets, roof protrusions, plumbing vents, and at ground level cars, people, landscaping, pets, walkways, ground mounted mechanical units.
NOTE: Returned Alpine snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project.
We have to collect sales tax in the state of Vermont. Our website does not automatically collect taxes in that state. Please contact us directly to place your order; otherwise, we will call you to collect sales tax after the order is placed online.
-
Sieger 3-Pipe Rail Brackets
Sieger 3-Pipe Rail Brackets are available in bronze, aluminum, or galvanized iron. This is the heavy-duty pipe bracket only. This guard uses three 1/2" diameter pipes or solid bars, which are not included.
5½" high, 3" wide at base, 14" long with strap, 3/16" x 1" strap.
BRACKETS SHOULD BE PLACED 3' APART FOR IRON OR BRONZE, AND 2' APART FOR ALUMINUM
Buy heavy-duty "Type K" copper pipe through your plumbing supply outlets in 10' or 20' lengths, or use solid 1/2" copper or brass rods. Copper pipes should be soldered together with couplings using a plumber's torch, wire solder, and paste or liquid flux. For aluminum brackets, use stainless steel pipe.
Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).Bracket Options:
Aluminum - $19.00Galvanized Iron - $27.00
Bronze - $49.00
You may need an adhesive/sealant if attaching to a metal roof.
Download instructions showing how to install on an existing slate roof.
NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.
Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted. There is an upcharge of $5.00 per snow guard. If you're not in a hurry and you want to order less than (200), Sieger will hold your order until they have another paint job of the same color, then paint them at that time. It may be a few weeks wait.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
Sieger MC2 Snow Guards
Sieger MC2 Cast Aluminum or Bronze Snow Guards are heavy-duty, classic cast snow guards for mechanically fastening to a flat metal roof. If mechanically fastening, also use an adhesive.
5" long, 5 1/2" wide, 3" high. Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).
We also have this in a narrower style of aluminum (MC2N).
Options:
MC2A Aluminum - $7.00MC2B Bronze - $21.00
NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.
Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
Sieger MC2N Snow Guards
Sieger MC2N Cast Aluminum Snow Guards are for flat metal roofs. Attach with mechanical fasteners and an adhesive. We also have this in a wider style of aluminum (MC2A).
5" long, 5 3/8" wide, 3" high, 5.8 oz. Sieger products almost always ship within 24 hours, if not same day (custom paint requires longer lead time).MC2N Aluminum - $7.00
NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
Sieger Eagle2 Snow Guards
Sieger Eagle2 Snow Guards are for flat metal roofs, and are available in aluminum or bronze (select below). Attach to the roof with solder (on copper roofs), or caulk/adhesive, and mechanical fasteners. If mechanically fastening, also use an adhesive.4 3/4" long, 4 1/2" wide, 3 3/4" high. Sieger products almost always ship within 24 hours, if not the same day (custom paint requires a longer lead time).
Options:
Aluminum - $8.00Bronze - $18.00
NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
Jalco Eagle Snow Guards for Flat Roofs
Available in aluminum, powder coated aluminum, or bronze.
These are screw type snow guards for flat roofs. Two mounting holes. 2 5/8" long base, 5 1/2" wing span width, 4" high. Comes with two fasteners per snow guard.
Jalco aluminum snow guards can be powder coated in almost any color upon request.
See color chart below or view online (polyester).
Two week lead time for powder coated Jalco snow guards. Two to three week lead time for bronze snow guards.
Jalco aluminum mill finish products almost always ship within 24 hours, if not same day.Options:
Aluminum Mill Finish - $7.00
Aluminum Powder Coated - $10.00
Bronze - $31.50 -
Sieger Boss Snow Guards
Sieger Boss Snow Guards for metal roofs.Options:
Aluminum Boss3A - $4.15Bronze Boss3B - $9.50A heavy-duty cast snow guard for flat metal roofs. Attach to roof using caulk/adhesive and mechanical fasteners. 4 5/8" long, 2 3/8" wide, 2 3/8" high.Sieger products almost always ship within 24 hours, if not same day (custom paint requires a longer lead time).NOTE: Returned Sieger snow guards incur a 25% restocking fee within 10 days of receipt of goods. Please call with any questions to make sure you're ordering the correct product for your project.Sieger aluminum snow guards can be painted. There is a minimum order of (200) snow guards for painting.They are not powder coated, they are painted for an additional $4.00 per snow guard. If you're not in a hurry and you want to order less than (200), we will hold your order until we have another paint job of the same color, then paint them at that time. It may be a few weeks wait.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
Mullane 640 Snow Boss Snow Guards
The Mullane Snow Boss is a traditionally shaped, cast aluminum snow guard for the mid-panel application on all standing, batten, and flat seam, non-copper metal roofs. Typical attachment is by high-strength adhesive, and/or mechanical fasteners.
Options:
640M: ($13.50) Mill Finished Cast Aluminum - "Mill Finish" is the natural appearance of the aluminum as it comes from the rolling mill or the extrusion mill. It appears "as is" with no external mechanical or chemical finishing.
640E: ($16.00) Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase.
NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders over $1,000.00. -
Mullane 100CPSM Snow Guards
The Mullane 100CPSM Copper/Bronze Snow Guard is for soldering to flat copper or stainless steel roofs. This is a traditional spike style snow guard first patented in 1899. It is historically accurate for period restorations and appropriate for new construction, being primarily suited for residential usage. The shoe is cast bronze and the strap is 24-ounce cold-rolled copper.
If you need soldering supplies, visit our Solder Warehouse.
NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
Mullane 200CPSM Snow Guards
The Mullane 200CPSM Snow Guard is for soldering to flat copper or stainless steel roofs. This is a traditional copper/bronze spike-style snow guard first patented in 1899. It is historically accurate for period restorations and appropriate for new construction, being primarily suited for residential usage. The #200 casting is 30 percent larger than the #100 and is more appropriate for larger buildings and where the roof shingles are thicker, such as on tile roofs. The shoe is cast bronze and the strap is 24-ounce cold-rolled copper.If you need soldering supplies, visit our Solder Warehouse.NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
Mullane 300CPSM Snow Guards
The Mullane 300CPSM snow guard is a solid copper and bronze snow guard for all flat roof applications, but especially suited for soldering to copper roofs. The bronze shoe is riveted to a 24-ounce copper base flange for extreme durability and snow load bearing capacity.5.25" long, 2.56" wide, 1.58" high.$17.50 each
If you need soldering supplies, visit our Solder Warehouse.NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders over $1,000.00. -
Mullane 630M Snow Boss Snow Guards
The Mullane 630 Snow Boss, manufactured by Berger, is a solid mill-finish cast-aluminum snow guard best used for curtain wall systems, window wells, or cornice shelves.
Typical installation is by means of high strength adhesives such as SB-190, that develop superior bonding strength on modern metal roofs coated with plastic resin paints such as Kynar®.
Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger. May also be mechanically attached by drilling holes in the snow guard and using stainless steel screws.
630M $13.50
NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders over $1,000.00. -
Mullane 690M Snow Boss Snow Guards
The Mullane 690M Snow Boss Snow Guards are decorative, spoked, half-round, solid cast, mill-finish aluminum snow guards attached with a high-strength adhesive, for the mid-panel application on all standing, batten and flat seam, non-copper metal roofs. You can spray paint them to suit your desires, as shown in the photo.
You can also mechanically attach these snow guards with stainless steel screws , but you have to drill pilot holes in them first (and still use an adhesive ).$23.50
NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders over $1,000.00. -
Mullane 650C Snow Boss Snow Guards
The Mullane 650 Snow Boss Snow Guards for metal roof systems are constructed with durable, UV-resistant polycarbonate. Can be mechanically fastened or adhesive mounted.The Berger 650 includes a new patent-pending base design, the latest technological advance in adhesive mounted snow guard systems. The cross-hatch design strengthens adhesive grip by increasing surface area and texture, providing for faster solvent escape and adhesive curing. A series of evenly spaced holes in the base allows the solvents to dissipate quickly and become "glue rivets."$5.50NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders over $1,000.00.
-
Berger SM Aluminum Snow Guards
Berger SM aluminum snow guards for flat metal roofs are available in a mill finish or primed with an epoxy primer.
5" wide shoe, 4" long, 2 1/4" wide mounting bracket; stands 2 1/8" up from roof.
Options:
SMMFSG Mill Finish: $17.00
SMEASG Epoxy Primer: $20.50NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code. -
Berger 100 Shoe Snow Guards
Berger 100 Shoe Snow Guards are available in copper or stainless steel. The copper version can be mechanically fastened, or soldered (to copper roofing), or can be mechanically mounted onto corrugated roof panels.There may be a lead time of up to four weeks on these snow guards. For an identical, less expensive snow guard with no lead time get our Green Mountain B3.
These snow guards provide affordable protection for your gutter, foundation, shrubbery, automobiles or pedestrians. They are ideal for mounting on corrugated or flat roof panels, and will last forever. Mechanically fasten using stainless steel gasketed screws and an adhesive.They have 8.75-square-inches of snow stopping area and a 1" X 2" flat mounting area. Four-inch-wide face, two-inch-long base, sits 2 3/4" up from the roof. Two mounting holes.
Options:
SG-CPS Copper: $5.50SG-SSS Stainless Steel: $5.50NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.
We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or send us an email and include the item, quantity, and shipping zip code.
