Corrugated Metal

We sell snow guards for corrugated metal roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet! 

  • Green Mountain B3

    Green Mountain B3 Snow Guards are available in copper. This snow guard can be mechanically fastened, soldered (to copper roofing), or can be mechanically mounted onto corrugated roof panels.  


    Green Mountain snow guards normally ship out within 24 hours.  

    These snow guards provide affordable protection for your gutter, foundation, shrubbery, automobiles, or pedestrians. They are ideal for mounting on corrugated or flat roof panels and will last forever. Mechanically fasten using stainless steel gasketed screws and an adhesive. 

    They have 8.75-square-inches of snow-stopping area and a 1" X 2" flat mounting area. Four-inch-wide face, two-inch-long base, sits 2 3/4" up from the roof. Two mounting holes.



    Options:

    SG-B3 Copper: $4.00

    NOTE: Returned Green Mountain snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.  

    We offer free shipping on orders over $1,000.00. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.
    0.0
    Add first review
    Not rated yet
    • $4.00
    Sorry, we only have 15 of that item available
  • Berger 100 Shoe Snow Guards

    Berger 100 Shoe Snow Guards are available in copper or stainless steel. The copper version can be mechanically fastened, or soldered (to copper roofing), or can be mechanically mounted onto corrugated roof panels.  
     
     
     
     
     
     
    These snow guards provide affordable protection for your gutter, foundation, shrubbery, automobiles, or pedestrians. They are ideal for mounting on corrugated or flat roof panels and will last forever. Mechanically fasten using stainless steel gasketed screws and an adhesive.
     

    They have 8.75-square-inches of snow-stopping area and a 1" X 2" flat mounting area. Four-inch-wide face, two-inch-long base, sits 2 3/4" up from the roof. Two mounting holes.  

    Options:

    SG-CPS Copper: $6.00
     
    SG-SSS Stainless Steel: $5.50
     
       
    NOTE: Returned Berger snow guards incur a 25% restocking fee and must be returned within 30 days. Please call with any questions to make sure you're ordering the correct product for your project.  

    We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085, or 
    send us an email and include the item, quantity, and shipping zip code.

     









    0.0
    Add first review
    Not rated yet
    • $5.50
  • Jalco Standard Snow Guard for Corrugated Roofs

    Jalco Aluminum Snow Guards for corrugated metal roofs are designed to prevent snow slides.

    Two mounting holes. 2" long base by 2 1/2" wide, 5 3/8" overall width, 2 1/2" high, 4.0 oz. Comes with (2) 2 1/4" fasteners per snow guard. Also use a high strength adhesive sealant.

    Jalco aluminum snow guards can be powder coated in almost any color upon request. See color chart below.

    Two week lead time for powder-coated Jalco snow guards.

    Jalco aluminum mill finish products almost always ship within 24 hours, if not same day.

    Options:

    Mill Finish - $7.00

    Powder Coated - $13.00

    If you want to paint your own Jalco snow guards:

    1) Clean with paint thinner to get the dirt off.
    2) Prime with a self-etching aluminum primer available at automotive supply stores.
    3) Use a Rustoleum type paint.
    4) Dip the snow guards in the paint and let the excess run off.
    5) Alternatively, use spray paint. 

    5.0
    Score: 5.0 (votes: 2)
    Reviews: 2
    • $7.00
  • Alpine PD80 Snow Guards

    Easily installed, the Alpine PD80 snow guard fastens to the top of corrugation using existing fastener holes along the roofs ribs, placing the penetration points above the surface of the panel.    

    "Saddle" design holds back snow and ice while allowing melt-off and rain to flow through.  

    Applicable Roof Types: New Metal Corrugated; Existing Metal Corrugated; New Metal Pocket Ribbed; Existing Metal Pocket Ribbed.

    Designed to move the standard penetration point from the water drain channel to the top of the rib, minimizing the possibility of water infiltration.
     

    Available in mill-finish aluminum and mill-finish steel for either round corrugations or square (rib style) corrugations.   

    Made in the USA using recycled materials. 

    SGPD80-AL: Mill-Finish Aluminum (for rounded corrugate tops) - $6.00.

    SGPD80-IPRAL: Mill-Finish Aluminum (rib style, for square rib corrugate tops) - $6.00.

    SGPD80-ST: Mill-Finish Steel (for rounded corrugate tops) - $6.00.

    SGPD80-IPRST: Mill-Finish Steel (rib style, for square rib corrugate tops) - $6.00.   
     
     
     

    NOTE: Returned Alpine snow guards incur a 25% restocking fee. Please call with any questions to make sure you're ordering the correct product for your project. 
     
     
     
     
     
     
     

    0.0
    Add first review
    Not rated yet
    • $6.00
    • Free shipping

    Stainless Gasketed Screws #S07C162XOM


    Free Shipping (Alaska and Hawaii not included).

    Stainless Low-Profile Gasketed Screws #S07C162XOM.

    1000 count, 1 5/8". Washered stainless screws are hard to find. We can't guarantee these will be in stock. Inventory is low, but once stock is depleted, we will disable them from the store.

    Stainless steel screws for fastening snow guards mechanically to underlying roof decks. Stainless steel screws are compatible with all metals, including copper, aluminum, and steel. Major thread diameter is approximately 5/32".

    These screws have #1 square head slots. Type 305 stainless steel is a chromium nickel stainless steel that has an increased nickel content with excellent corrosion resistance.

    Perfect when used with Surebond SB-190 High Strength Adhesive Caulk, or other high-strength construction sealant/adhesive.

    Allow 2-3 weeks for delivery. Made in Taiwan.

    0.0
    Add first review
    Not rated yet
    • $275.00

Footer navigation