We sell snow guards for corrugated metal roofs at the Snow Guard Warehouse. We have the largest selection of snow guards and snow rails on the internet!
Why You Need Snow Guards: Read a magazine article by Joseph Jenkins.
#12 ReGrip™ Screws - 300 Series Stainless Steel with 5/8" OD Bonded Washer - *50 Year Warranty*
300 series stainless steel in 1-1/2”, 2” or 2-1/2” sizes. The sharp point drills easily and the oversized 5/8” EDPM washer seals tightly. Fasten snow guards effortlessly using the SS screw. Quick ship colors are also available to match your roof color. 1/4" hex head.
FREE SHIPPING IN THE CONTINENTAL USA
They have 8.75-square-inches of snow-stopping area and a 1" X 2" flat mounting area. Four-inch-wide face, two-inch-long base, sits 2 3/4" up from the roof. Two mounting holes.
Jalco Aluminum Snow Guards for corrugated metal roofs are designed to prevent snow slides.
Two mounting holes. 2" long base by 2 1/2" wide, 5 3/8" overall width, 2 1/2" high, 4.0 oz. Comes with (2) 2 1/4" fasteners per snow guard. Also use a high strength adhesive sealant.
Jalco aluminum snow guards can be powder coated in almost any color upon request. See color chart below. There is a two week lead time for powder-coated Jalco snow guards. Jalco aluminum mill finish products almost always ship within 24 hours, if not same day.
Options:
Mill Finish
Powder Coated
If you want to paint your own Jalco snow guards:
1) Clean with paint thinner to get the dirt off.
2) Prime with a self-etching aluminum primer available at automotive supply stores.
3) Use a Rustoleum type paint.
4) Dip the snow guards in the paint and let the excess run off.
5) Alternatively, use spray paint.
PD80 SNOW GUARDS FOR CORRUGATED METAL ROOFS
Easily installed, the Alpine PD80 snow guard fastens to the top of corrugation using existing fastener holes along the roofs ribs, placing the penetration points above the surface of the panel.
"Saddle" design holds back snow and ice while allowing melt-off and rain to flow through.
Applicable Roof Types: New Metal Corrugated; Existing Metal Corrugated; New Metal Pocket Ribbed; Existing Metal Pocket Ribbed.
Designed to move the standard penetration point from the water drain channel to the top of the rib, minimizing the possibility of water infiltration.
Available in mill-finish aluminum and mill-finish steel for either round corrugations or square (rib style) corrugations.
Made in the USA using recycled materials.
OPTIONS:
SGPD80-AL: Mill-Finish Aluminum (for rounded ribs)
SGPD80-IPRAL: Mill-Finish Aluminum (for square ribs)
SGPD80-ST: Mill-Finish Steel (for rounded ribs)
SGPD80-IPRST: Mill-Finish Steel (for square ribs)
NOTE: Returned snow guards incur a 25% restocking fee. Please call 814-786-9085 with any questions. We provide free shipping on snow guard orders over $1,000.00.
Free Shipping (Alaska and Hawaii not included).
Stainless Low-Profile Gasketed Screws #S07C162XOM.
1000 count, 1 5/8". Washered stainless screws are hard to find. We can't guarantee these will be in stock. Inventory is low, but once stock is depleted, we will disable them from the store.
Stainless steel screws for fastening snow guards mechanically to underlying roof decks. Stainless steel screws are compatible with all metals, including copper, aluminum, and steel. Major thread diameter is approximately 5/32".
These screws have #1 square head slots. Type 305 stainless steel is a chromium nickel stainless steel that has an increased nickel content with excellent corrosion resistance.
Perfect when used with high-strength construction sealant/adhesives.
Allow 2-3 weeks for delivery. Made in Taiwan.
European Flashing Training Course - Now booking for February and/or March 2026
Dates are to be determined according to the schedules of the students and instructor. Sign up now. When we have 4 students registered, we will set the dates according to the availability of all 5 persons attending.
Only 4 persons per class. Call to schedule (814-786-9085), or select below. If you book online, please indicate the students' names in the "Customer Notes" at checkout.
Duration: Two days - 8am - 3pm, including break. Lunch is included. The course is limited to 4 students. Tools are provided.Basic construction and roofing knowledge is beneficial, but not necessary. Language: English
Location: Grove City area, Western Pennsylvania, USA. 143 Forest Ln. Grove City, PA 16127. GPS Joseph Jenkins Inc. (If you GPS the physical address, it may send you to Grove City, PA. We are 9 miles away from Grove City near the Barkeyville exit #29 on Interstate 80.)
This course is taught by John Sheridan, creator and owner of Sheridan Metal Resources LLC. With 50 years of experience in the roofing industry, we will take an in-depth, hands-on dive into various double-fold flashing techniques. John has been training European details since 2003 with a focus on copper, zinc, and stainless steel (Roofinox). He is a North American certified trainer for VM Zinc, Aurubis Copper, and Roofinox Stainless Steel.
Learn sweep-seam, double-locked flashing techniques. Trainings are a two day hands-on experience designed and structured to introduce craftsmen to the tools and knowledge. We teach everything required to gain a basic working knowledge of double-fold (double-lock standing seam) Euro-inspired techniques. You can expect an introduction to the specific tools and details we will be working with during the training. Students will take the basic knowledge learned and apply them to a hands-on mock-up. Topics covered will be: eave, rake, transition, change of direction, chimney, valley and pipe flashing details.
Course Handouts: Handout with common European flashing details.
Standing Seam - 85RF Snow Defender
If you’ve ever tried to install a standing seam snow guard and become frustrated with alignment, this product will solve the problem. Designed to be part of a two-part installation system with any of the most popular S-5!® clamps, Levi’s 85RF Snow Defender aligns correctly on the seam connection every time.
The 85RF is designed to combine the versatility of the S-5!® clamp systems with the beauty and durability of the Snow Defender™ series. It adapts quickly to the clamps using one bolt that is easily accessed from the top and aligns squarely every time. A versatile snow guard that fits vertical folded seam profiles for S-5!®, U, S, N, V, clamps (sold separately). It’s made of stainless steel in the USA, available in 40 plus color finishes, and the 85RF features Levi’s 15-year warranty.
• Type 304 Stainless Steel
• Does Not Penetrate the Metal
• Powder Coated or Mill Finish
• No Caulk Needed
• Patented
• Fits Multiple Standing Seam Profiles
• Aligns Squarely on Roof
STATE THE COLOR IN THE CUSTOMER NOTES SECTION AT CHECKOUT!
Standing Seam - 7500 Snow Defender
Based on the design of the popular Snow Defender® 6500, this color matched, 304 Stainless Steel snow guard has the more traditional, historic look of a cast snow guard. The decorative cutouts are embossed for increased strength and the proven attachment method using set screws means the Snow Defender® 7500 DECO™ will last the life of your roof. This strong 304 stainless design and patented non-piercing clamping attachment allows snow retention on most standing seam profiles. It’s also available in 40 plus colors that match with popular standing seam roof colors.
• Made with Type 304 Stainless Steel
• 410 Stainless Steel Set Screws to Prevent Seizing
• Powder Coated or Mill Finish
• Multiple Colors in Stock
• Copper Plated Also Available
• 32 Pieces per Box
• Does Not Penetrate Through Metal
• Patented
• Excellent Fade Resistance
STATE THE COLOR IN THE CUSTOMER NOTES SECTION AT CHECKOUT!
Standing Seam Snow Guards - Levi's 6500 Snow Defender
The patented Snow Defender® 6500 is designed for standing seam roofs and is the snow guard of choice for many roofers. It fits standing seams up to 3/8″ width and most 1″ through 1-3/4″ seam heights. The strong 304 stainless-steel design and patented non-piercing set-screw clamping system allows for effective snow retention on most standing seam roof profiles. It’s also available in 40-plus colors that match with popular standing-seam roof colors.
• Made with Type 304 Stainless Steel
• 410 Stainless-Steel Set Screws to prevent Seizing
• Powder Coated
• Multiple Colors in Stock
• 32 Pieces Per Box
• Does Not Penetrate Through metal
• Patented
• Textured Colors Available
• Copper Plated Also Available
STATE THE COLOR IN THE CUSTOMER NOTES SECTION AT CHECKOUT!
