Search

Berger Brothers Model #95 heavy duty ornamental snow guard is available in bronze, aluminum, or galvanized iron. This is a larger guard with Gothic styling designed to transfer snow and ice loads more effectively to reduce cracking of the slate.

Options:

SGML95: Galvanized Iron - $26.00

SGAL95: Aluminum - $31.50

SGBR95: Bronze - $43.50

1/8" x 1" x 12" bar in appropriate metal combination. Excellent in areas that receive heavy snow! This snow guard is for new slate roof installation but can be installed on existing slate roofs too.

Download instructions showing how to install on an existing slate roof.

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on snow guard orders over $1,000.00.

Berger #1 Heavy Duty Snow Guards for Standing Seam Roofs are available in bronze or galvanized iron.   

The roofer's choice since 1883 for use on standing seam metal roofs! It weighs 5 1/2 oz., stands 2 3/4" high off of the roof, and is 5" wide. Pinch to clamp over the seam to create a rigid, permanent job. You may need the Double Welt Iron to hold the seam in place as you crimp the snow guard together (a sledgehammer head can work too). The gap that fits over the seam is 1/4" wide. If your seam is thicker than 1/4", this snow guard probably is not the best choice. For a thicker seam, try the Berger AP Aluminum Snow Guards. 

Options:

SGML-1 Galvanized Iron: $22.00

SGBR-1 Bronze: $31.00

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on snow guard orders over $1,000.00.

Options:

SGML20 Iron: $13.00

SGBR20 Bronze: $21.00

Free shipping over $1,000.00.

Berger 100 Retrofit Snow Guards. 

We have added a few pictures of the Berger 100s beside Snow Birds, which are very similar. We recommend the Snow Bird to anyone looking for a Berger 100 alternative.

13 1/2" maximum reach to nail. More about retrofit snow guard "reach."

These are high-quality, durable, retrofit snow guards for installation on existing slate or asphalt shingle roofs. For new roofs, use the Berger 100 HP Snow Guards.

Berger 100HP Snow Guards are 9" long overall, and 4" wide, with a 1" wide strap. The angled shoe is 3" high and sits about 2.5" off the roof surface. These are good, economical, snow guards for new roof installations (not a retrofit model).

Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

We have added a few pictures of the Berger 100s beside Snow Birds, which are very similar. We recommend the Snow Bird to anyone looking for a Berger 100 alternative.

Options:

SGS100HP: Stainless Steel: $11.50

SGC100HP: Copper: $17.00

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on orders over $1,000.00.

Berger SL1 Snow Meister Cast Aluminum Snow Guard for Standing Seam Roofs are available in Mill Finish or with an Epoxy Primer. 

Snow Meister SL-1 Snow Guard is designed to accommodate 1” Snap Lock Panels and a Single Lock Seams 1.0" deep x .64" wide.  Symmetrical design rotates 180 degrees to match seam lock orientation. These guards can also be used on standing seams up to 1.75" tall.

Options: 

SL-1MF: $27.00, Mill Finished Aluminum - natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing.

SL-1EBK: $31.00, Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase.

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on snow guard orders over $1,000.00.

They have 8.75-square-inches of snow-stopping area and a 1" X 2" flat mounting area. Four-inch-wide face, two-inch-long base, sits 2 3/4" up from the roof. Two mounting holes.  

Berger SM aluminum snow guards for flat metal roofs are available in a mill finish or primed with an epoxy primer.

5" wide shoe, 4" long, 2 1/4" wide mounting bracket; stands 2 1/8" up from the roof. 

Options:

SGSS200 Mill finish stainless steel: $4.00

SGCP200 Copper: $9.50

Berger Pro 100 Retrofit Snow Guard

We have added a few pictures of the Berger 100s beside Snow Birds, which are very similar. We recommend the Snow Bird to anyone looking for a Berger 100 alternative that looks the same. Our Sieger,  Salvo, Vermont, PD10, and Fusion snow guards are also in stock and ship quickly.  

17 1/2" overall length, 4" wide face, 8.3 oz. each. 

The heavy-duty Berger Pro 100 snow guard is compatible with corrugated, flat, natural slate, TruSlate, and asphalt shingled roofs. This snow guard provides fast installation and is ideal for existing roofs.  

The superior design of the Pro 100 includes a one-inch gusset that reinforces the shoe, which makes this snow guard 5 times stronger than traditional residential snow guards. The Pro 100 has been tested to withstand a 300 lb. point load at any location when applied to the gusset side of the shoe. Simply insert the slotted bar under the slate or shingle, engage a nail with one of the conveniently placed slots, and pull to fully secure the bar. 

12.5" maximum reach to nail. More about retrofit snow guard "reach."

Options:

SGGP100: Galvanized Steel: $9.50

SGSP100: Stainless Steel: $ 14.00

SGCP100: Copper: $20.50

  NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on orders over $1,000.00.

Berger AP400 and AP516 snow guards are non-penetrating mill finish aluminum devices that have been engineered specifically for use with more popular structural and non-structural pre-formed and architectural metal roof systems. They're secured without glues or sealants, utilizing custom-milled stainless-steel set screws to clamp them in place. They're produced in cast aluminum and are available in two different seam widths and heights, and can be custom painted (see below).

We have an almost identical snow guard not listed on our website, yet. They are like the AP400M except more economical at $29 each and of the same quality. Please call 814-786-9085 for more information. 

AP400: Seams up to 3/8" thick & 1 1/2" high.

AP516: Seams up to 1/2" thick & 1 1/2" high.

These snow guards do not restrict thermal movement. The deep throats permit them to be secured directly without damaging caps or compressing internal gasketing or sealant pockets. The 6" wide, deep blade design makes it particularly effective in retaining snow with the higher seams and wider panel widths common in pre-formed architectural roofing.

Options:

AP400M/AP516M: Mill Finished Cast Aluminum. "Mill finish" is the natural appearance of aluminum as it comes from the rolling mill or the extrusion mill. It is "as is" with no external mechanical or chemical finishing. $37.00

AP400E/AP516E: Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase. $41.00

AP400C/AP516C: Powder coated in your choice of 9 custom colors; Matte Black, Colonial Red, Dark Bronze, Forest Green, Hartford Green, Medium Bronze, Mansard Brown, Charcoal Gray, Slate Gray (see color chart below). Powder coating requires a 3-week lead time. Please provide the color choice in the customer notes when placing your order (no cancellations or returns on powder-coated snow guards). $47.00

We also have this style of snow guard for flat roofs. 

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee and must be returned within 30 days. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on orders over $1,000.00.

Berger RT200 and RT300 snow guards are non-penetrating devices that are secured to the standing seams of metal roofs utilizing stainless steel set screws to clamp them in place. They require no glues or sealants and will not restrict thermal movement or contribute to unsightly oil canning. These are particularly suited for double-lock and mechanically seamed metal roofing. Being traditional in design, they are ideal for restoration and preservation work. 

RT200: For seams up to 3/16" wide (0.188") and no higher than one inch. Suited for use with light gauge sheet metal such as 40 lb. terne, 26-gauge galvanized, and 16 oz. copper. 

RT300: For seams up to 9/32" wide (0.297") and no higher than one inch. Suited for heavier gauge metals such as 20-ounce copper, 24-gauge prefinished metal, and products of similar thickness.
 

Options:

RT200M or RT300M - Mill Finished Cast Aluminum: the natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing. $22.00

RT200E or RT300E - Medium Gloss Black E-Coat Epoxy Primer: requires a final color coat after purchase. $25.00

RT200 or RT300 - Powder coated in a custom color (no cancellations or returns). Powder coating may require a 3-week lead time, although sometimes they are in stock. Color Choices: Matte Black, Colonial Red, Dark Bronze, Forest Green, Hartford Green, Medium Bronze, Mansard Brown, Charcoal Gray, Slate Gray (download the color chart below.) $31.00

RT200B or RT300B- Cast Bronze. $30.00

We also have this style of snow guard for flat roofs.  

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee and must be returned within 30 days. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on orders over $1,000.00.

Berger Snow Meister SG1 Cast Aluminum Snow Guards for Standing Seam Roofs are available in Mill Finish, with an Epoxy Primer, or in polished bronze. 

The SG-1 Snow Meister Snow Guards are used for a traditional double lock standing seam roof that is 1.0" deep x .250" wide.  These guards fit both 1" and 1-1/2" high seams.

The symmetrical design rotates 180 degrees to match the seam lock orientation. The set screws are stainless steel so these snow guards can be used with any type of metal roof.

Options:

SG-1MF: $26.00, Mill Finished Aluminum - the natural appearance of aluminum as it comes from the mill, with no external mechanical or chemical finishing.

SG-1EBK: $30.00, Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase.

SG-1PBZ: $39.00, Polished Bronze - non-stock, special order (no cancellations or returns). Requires extended lead time.

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on snow guard orders over $1,000.00.

The Mullane Snow Boss is a traditionally shaped, cast aluminum snow guard for the mid-panel application on all standing, batten, and flat seam, non-copper metal roofs. Typical attachment is by high-strength adhesive, and/or mechanical fasteners. 

Options:

640M:($15.00) Mill Finished Cast Aluminum - "Mill Finish" is the natural appearance of aluminum as it comes from the rolling mill or the extrusion mill. It appears "as is" with no external mechanical or chemical finishing.

640E: ($18.00) Medium Gloss Black E-Coat Epoxy Primer - requires a final color coat after purchase.

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on orders over $1,000.00.

$20.00

The Mullane 300S standard snow guard is available for new installations on slate roofs or asphalt shingle roofs. This is a solid bronze and copper pad style snow guard for all steep roof applications. The half round Model #300 casting is attached to a 20 oz. copper installation base flange by four brass rivets for extreme durability and snow load bearing capacity.

Options:

300S-NA for Slate Roofs:$19.00, 18" long, 2.56" wide, it protrudes up from the roof about 1.6"

300S-AS for Asphalt Roofs:$18.50, 7.25" long, 2.56" wide, protrudes up from the roof about 1.6"

Tested at 870 lbs. pressure. The solid bronze casting eliminates the corrosion problem caused by condensation which is formed inside closed, pressed copper snow guards. The installation flange can be easily fabricated to any length for any roof application and is also available with our Retro-Hook.

The installation flange can be easily fabricated to any length for any roof application, typically 18" for new slate and 7.25" for shingle. For solder application on copper roofs, specify the Model #300CPSM.

Snow guards should be installed where the potential for the sudden sliding of ice and snow can be hazardous to people or property below. Falling snow is a safety issue, and careful consideration of liability issues should be part of a carefully designed roof system in all areas prone to winter snow and ice.

All BRONZE GUARD® products are cast in pure tin bronze, using only virgin metals to assure the highest quality alloy. The castings are produced locally by old-world craftsmen using state of the art equipment to assure that each casting is of consistent quality. The final assembly is done by hand, using only solid copper rivets, so that each finished product is of uniform quality.

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on orders over $1,000.00.

$19.50 each.

Options:

100S-NA for Slate application

100S-AS for Asphalt application

We also have this style in retrofit (for existing roofs) and for flat copper roofs.

NOTE: Returned Berger and Mullane snow guards incur a 25% restocking fee. Please call (814) 786-9085 or email us with any questions to make sure you're ordering the correct product for your project. 

We offer free shipping on orders over $1,000.00.

Mullane Fitrite 3-Pipe Brackets for Designer Tile   

Options: 

#832 Bronze  $735.00

#832S Short Bronze $482.00

#831 Aluminum $395.00

3-pipe brackets use 3/4" I.D. (1" O.D.) pipe and fittings. Aluminum brackets require galvanized pipes. Bronze brackets use brass pipes.

This is a special order item that may require a 6-8 week lead time and is non-returnable and non-refundable. You will need to send a sample piece of tile for an exact match. Space two to four feet apart horizontally depending on the roof slope and snow load.

ADDITIONAL ITEMS:

GLP1050-10: 10' sections of 3/4" I.D. (1" O.D.) Galvanized Pipe for 3-pipe brackets are $72.00.

GPCON1050: 3/4" I.D. Galvanized Pipe Couplings are $6.00 each.

GPEC1050: 3/4" I.D. Galvanized Pipe End Caps are $6.00 each.

RBP1050-12: 12' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $330.00. 

RBP1050-6: 6' sections of 3/4" I.D. (1" O.D.) Brass Pipe for 3-pipe brackets are $166.00    .

RBPCON1050: 3/4" I.D.  Brass Pipe Couplings are $9.00 each.  

RBTEC1050: 3/4" I.D.  Brass Pipe End Caps are $9.00 each.   

We offer free shipping on orders of sufficient quantity. For more information, call us at 814-786-9085 or send us an email and include the item, quantity, and shipping zip code.